Panasonic Viera TX-P50VT20B Operating Instructions Manual

Contents

86Using Network Services(DLNA / VIERA CAST / freesat)Network settings for the Wireless LAN connectionThis setting is for the network connection by using Wireless LAN Adaptor. (Wireless LAN connection)Confirm the encryption key, settings and positions of your access point before starting setup. For details, read●the manual of the access point.Select “Network Type” and set to “Wireless”Network SetupNetwork Type WirelessAccess Point SettingsIP/DNS SettingsProxy SettingsNo settingsConnection TestVIERA Name VIERASoftware UpdateMAC Address ab-cd-ef-gh-ij-klsetselectSelect “Access Point Settings”Network SetupNetwork Type WirelessAccess Point SettingsIP/DNS SettingsProxy SettingsNo settingsConnection TestVIERA Name VIERASoftware UpdateMAC Address ab-cd-ef-gh-ij-klaccessselectSelect the connection type and setConnection TypePlease select network connection type.WPS(Push button)WPS(PIN)Search for access pointManualaccessselectFor details of each connection type● p. 87After settings, return to “Network Setup” screenConfirm the connection status of “Access Point Settings”Network SetupNetwork Type WirelessAccess Point SettingsIP/DNS SettingsProxy SettingsConnectedConnection TestVIERA Name VIERASoftware UpdateMAC Address ab-cd-ef-gh-ij-kl- - - : “Wired” is selected in “Network Type”.No adaptor : Wireless LAN Adaptor is not connected.No settings : Setting for connecting to the access point has not been set.Connecting... : Connecting to the access point in progress.Connected : Wireless LAN connection to the access point succeeded.To display the current access point settings, press the●OK button.To change the settings, select “No” on this screen.Some access points do not allow access to the internet.●Perform “Connection Test” (below) to check if internetconnection is available.USBovercurrent : Overcurrent error p. 110Select “Connection Test” and access to testNetwork SetupNetwork Type WirelessAccess Point SettingsIP/DNS SettingsProxy SettingsConnectedConnection TestVIERA Name VIERAAccessSoftware UpdateMAC Address ab-cd-ef-gh-ij-klaccessselectConnection TestCheck access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection for VIERA CAST.: succeededThe test is successful and the TV is connected to thenetwork.: failedCheck the settings and connections, and then performthis function again.If you continue to have difficulty, please contact yourinternet service provider.Performs automatic testing of the networkconnection for the TV. (This may take some time.)