Panasonic Viera TX-P50VT20B Operating Instructions Manual

Contents

42Menu Item Adjustments / Configurations (alternatives)SetupSystem MenuUSB KeyboardLayoutSelects the language that your USB Keyboard supportsUse a USB Keyboard to enter characters in VIERA CAST (p. 91).●Characters may not be displayed correctly on the TV screen depending on the●connected keyboard or the keyboard layout setting.Shipping Condition Resets all settings, for example, when moving house (p. 57)Owner ID Inputs the owner ID (p. 63)Common Interface Uses include to watch pay-TV (p. 64)System Update Downloads new software to TV (p. 65)Software Licence Displays the software licence informationSystem Information Displays the system information of this TVOther SettingsGUIDE Plus+SettingsPostcode Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 23)SystemInformation Displays the system information of the GUIDE Plus+ systemIntelligent FrameCreationAutomatically compensates the picture frame rate and removes judderingmovements to make the images smooth and clear (Off / On)This function is not available for selection (default to “Off”) when “Viewing Mode” is●set to “Game” or in the mode of 3D, PC input, photo or Network service operations.24p Smooth FilmAutomatically compensates the picture frame rate to make the 24p source movieimages smooth (Off / On)This is available only for 24p signal input and displayed instead of●“Intelligent Frame Creation”.This function is not available for selection (default to “Off”) when “Viewing Mode” is●set to “Game” or in the mode of 3D, PC input, photo or Network service operations.3D 24p Film Display Reduces juddering noises of the 3D images (Off / On)Set to “On” for the cinema-like images.●This function is available for the 3D-compatible 24p source movie.●Resolution EnhancerEnhances the picture resolution to make the image sharper (Off / Mid / Max)This function is available for SD (Standard definition) signal.●As for HD (High definition) signal, this function is available when aspect mode is●set to 16:9 (16:9 Overscan is set to “On”) or Zoom.Not valid on PC, VIERA CAST and Media Player●Power on PreferenceAutomatically selects the input when the TV is turned on (TV / AV)Set to “TV” to view picture from TV tuner.Set to “AV” to view input from an external equipment connected to a SCARTterminal, e.g. cable TV box.The external equipment must be switched on and sending a control signal for●automatic switching at power on to occur.Power on ChannelListAutomatically selects All Channels or Favourites list in the Information banner(p. 17) when the TV is turned on (All Channel List / Last)Set to “All Channel List” to display all the channels.Set to “Last” to display the one you selected last time.Not available on freesat or analogue mode●Auto StandbySets the time the TV automatically goes to Standby mode when no operation isperformed for the selected times (Off / 2 / 4 hours)Starting Timer Programming automatically does not affect this function.●Automatic input switching with the connected equipment affects this function and●time-count will be reset.The notification message will appear 3 minutes before going to Standby mode.●Power Save Reduces brightness of picture to economise on power consumption (Off / On)16:9 OverscanSelects the screen area displaying the image (Off / On)On : Enlarges the image to hide the edge of the image.Off : Displays the image in the original size.Set to “On” if noise is generated on the edge of the screen.●This function is available when aspect is set to Auto (16:9 signal only) or 16:9.●This function can be memorized separately for SD (Standard definition) and HD●(High definition) signals.SD Card LED Lights blue LED while SD Card is inserted (Off / On) (p. 74)DVI Input SettingChanges the black level in the image for HDMI input mode with DVI input signalmanually (Normal / Full)When the DVI input signal from the external equipment, especially from PC, is●displayed, the black level may not be suitable. In this case, select “Full”.The black level for HDMI input signal will be adjusted automatically.●For HDMI input mode with DVI input signal only●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of PC●input, Media Player or Network service operations. (p. 67 - 69, 75 - 81 and p. 90)Only available items can be selected.●How to Use Menu Functions