Panasonic Viera TX-P50VT50B Operating Instructions Manual

Also see for Viera TX-P50VT50B: Service manual

Link Functions (Q-Link / VIERA Link)101Reduce unnecessary power consumption in Standby [Standby Power Save]Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 49)The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisationwith the TV on / off state to reduce the consumption.When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the powerconsumption of the connected equipment is automatically minimised.When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is increasedto make startup time fast.● This function is effective if the connected equipment can change the power consumption in Standby mode and is setto higher consumption.Auto standby for unnecessary equipment [Intelligent Auto Standby]Set Intelligent Auto Standby [On (With reminder)] or [On (No reminder)] in the Setup Menu to use this function[Intelligent Auto Standby] (p. 49)When the TV is on, non-watched or non-used connected equipment goes into Standby mode automatically to reducethe power consumption. For example, when the input mode is switched from HDMI, the connected equipment will gointo Standby mode / or when Speaker Selection is changed to [TV] (except for watching a disc).● If you select [On (With reminder)], the on-screen message will be displayed before the connected equipment turns tostandby.● This function may not work properly depending on the connected equipment. If required, set to [Off].Direct TV Recording - What you see is What you record [Direct TV Rec]Records the current programme in the DIGA Recorder immediately.● If you connect a variety of recorders including other manufacturers’ recorders at the same time, connect the DIGARecorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2 for two recorders,connect the DIGA Recorder to HDMI1.● If you cannot operate, check the settings and the equipment.“Summary of Q-Link and VIERA Link features” (p. 97, 98), “Preparations” (p. 100)● To record the programme which DIGA Recorder does not support, SCART connection is required and the programmeis recorded by Q-Link function (p. 99).● Depending on the programme, SCART connection may be required to record.● You can change channel or turn the TV off while the recorder is recording from its own tuner.● You can not change channel while the recorder is recording from the TV tuner.1 Display [VIERA TOOLS] and select [VIERA Link]VIERA Linkselectaccess2 Select [Direct TV Rec] and start recordingVIERA Link MenuPause Live TVDirect TV RecVIERA Link ControlSpeaker SelectionStartHome CinemaRecorderStartselectaccess / start● You can also start recording directly when the code of the remotecontrol is “73” (p. 35).(When USB HDD / SD Card for recording is connected inDVB mode, [One Touch Recording] starts.)■ To stop recordingSelect [Stop] in [Direct TV Rec]VIERA Link MenuPause Live TVDirect TV RecVIERA Link ControlSpeaker SelectionStopHome CinemaRecorderStartselectaccess / stop● You can also stop recording directly.Unlock the tunerTuner LockedPress EXIT to unlock and stop recording