Panasonic Viera TX-P50VT50B Operating Instructions Manual

Also see for Viera TX-P50VT50B: Service manual

Identifying ControlsQuick Start Guide5 6 7314213Indicator / Control panelUsing the On Screen Displays - Operation guideMany features available on this TV can be accessed via the On Screen Display menu.■ Operation guideOperation guide will help you to operate by using theremote control.Example: [Owner ID]0 9* * * *Please enter new PINPINOwner IDEXIT PIN entry0 9EXIT PIN entryOperation guide■ How to use remote controlOpen the main menuMove the cursor / select from a range of options /select the menu item (up and down only) /adjust levels (left and right only)Access the menu / store settings after adjustmentshave been made or options have been setReturn to the previous menuExit the menu system and return to the normalviewing screenAuto power standby functionThe TV will automatically go into Standby mode in the following conditions:• No signal is received and no operation is performed for 30 minutes in Analogue TV mode.• [Off Timer] is active in the Timer Menu. (p. 24)• No operation is performed for the period selected in [Auto Standby] (p. 48).● This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch Recording.1 Function select● [Volume] / [Contrast] / [Brightness] / [Colour] /[Sharpness] / [Tint] (NTSC signal) / [Bass]∗ /[Treble]∗ / [Balance] / [Auto Setup] (p. 56, 57)∗[Music] or [Speech] mode in the Sound Menu2 Channel Up / Down, Value change (when using theF button), Switching the TV on (press either buttonfor about 1 second when in Standby mode)3 Changes the input mode4 Mains power On / Off switch● Use to switch the mains power.If you turned the TV off during Standby modeby the remote control last time, the TV will bein Standby mode when you turn the TV on withMains power On / Off switch.When pressing the control panel button (1 - 4), thecontrol panel guide appears on the right side of thescreen for 3 seconds to highlight the pressed button.5 Remote control signal receiver● Do not place any objects between the TV remotecontrol signal receiver and remote control.6 C.A.T.S. (Contrast Automatic Tracking System)sensor● Senses brightness to adjust picture quality when[C.A.T.S.] in the Picture Menu is set to [On].(p. 45)7 Power and Timer LEDRed: StandbyGreen: OnOrange: Timer Programming OnOrange (flash):Recording of Timer Programming, DirectTV Recording or One Touch Recording inprogressRed with orange flash:Standby with Timer Programming On, DirectTV Recording or One Touch Recording● The LED blinks when the TV receives a commandfrom the remote control.Rear side of the TV