Panasonic Viera TX-P50VT50B Operating Instructions Manual

Also see for Viera TX-P50VT50B: Service manual

Viewing 3D images423D SettingsIf the 3D images are not displayed correctly or seem unusual, adjust and setup the 3D settings.1 Display the menu2 Select [Picture]Pictureselectaccess3 Select [3D Settings] 2/2P-NR OffAccessOn3D SettingsScreen DisplayAdvanced SettingsReset to DefaultsPicture in Pictureselectaccess4 Select one of the following functions and set3D AdjustmentOffOnOnAccessPicture SequenceEdge Smoother3D Detection3D Signal MessageSafety Precautions3D SettingsAccessNormal2D 3D Depth Midselectadjustaccess / store■ To return to TVItem Adjustments / Configurations (alternatives)2D 3D Depth Selects a level of 3D-image depth for viewing converted 2D images [Min] / [Mid] / [Max]3D AdjustmentAdjustment of the 3D effect (except in [2D 3D] mode) [Off] / [On]● Set to [On] to enable [Effect] setting.● When setting to [On], a safety precaution message will appear. Read it carefully and press theBACK/RETURN button to go to [Effect] setting.[Effect]: Adjusts the 3D depth according to the contents or to your preference.PictureSequenceSelect [Reverse] if you feel that the sense of depth is unusual (except in [2D 3D] mode)[Normal] / [Reverse]Edge Smoother Set to [On] if you feel the contoured parts of an image are not smooth enough (except in [2D3D] mode) [Off] / [On]3D DetectionAutomatically detects the 3D format signals [Off] / [On] / [On (Advance)][On (Advance)]: Detects all the 3D format signals and displays the 3D image automatically.[On]: Detects the particular 3D format signals (Frame Sequential, etc.) and displays the 3Dimage automatically.● To view 3D images without any notifications and operations, set to [On (Advance)].3D SignalMessageSelects whether to give a notification message when a signal of 3D format is found [Off] / [On]● For DVB, Component and HDMI input● This function is not available when [3D Detection] is set to [On (Advance)].SafetyPrecautions Displays the precautions for viewing 3D imagesNote● [3D Adjustment] and [Picture Sequence] will not be memorised when changing the input mode or channel.