Panasonic Viera TX-P55VT30B Operating Instructions Manual

Also see for Viera TX-P55VT30B: Service manual

Contents

On screen messages125Message Meaning / ActionNo module inserted • Check the CI module is inserted completely. (p. 69)No recording - Alreadyrecording • The equipment may already be recording.No recording - Check media • The tape or disc may be “write protected”, full, missing or damaged.No recording - Playing • The equipment may be playing the tape or disc.No recording - Unknownreason • The recording may not be performed. Check the equipment.No service • The broadcaster has stopped the service. Check the channel in theTV Guide. (p. 23)No signal • The TV cannot detect the signal. Check the connection of the RFcable.Overcurrent error on USBdevice occurred.Please remove the USBdevice, and switch off theTV by mains power switch.• The connected USB device might cause overcurrent error. Followthe on screen instructions.• Check if foreign objects are inside the USB port.PIN incorrect! • The PIN number you entered is wrong.Please check settingsand connections on HDMIdevices. • Communication error in VIERA Link function (p. 105).Please enter a frequencybetween 10700 and 12750MHz.• The frequency you entered is out of range. Consult the receivedsatellite broadcasting company. (p. 61)Please check settingsand connections on HDMIdevices. • Communication error in VIERA Link function (p. 105).Please wait. • A function is in progress.Recording this channelnow • The recorder is recording the programme from its own tuner. You canturn the TV off and leave the equipment recording in the normal way.Reset to Factory ShippingCondition Completed.Please switch off TV.• [Auto Setup] will automatically start when Mains power On / Offswitch is next turned On. (p. 13)Sending Preset Data • Q-Link or VIERA Link channel download is in progress.Software successfullyupdated.Press EXIT to continue. • The software updating is finished.Software update failed.Please try again later.Press EXIT to continue.• Perform [System Update Search Now] in System Update (p. 70).If this is still unsuccessful, there may not be any new softwareavailable.The device is not directlyconnected to the TV.The device may not workcorrectly.• Please do not connect the device via a USB HUB.This device will beformatted and all contentsdeleted. Are you sure?• Once you format the USB HDD, all the recorded programme will beerased.This timer will not followthe TV Guide information.Press OK to continue,RETURN to restore originaltimer.• If you edit the start time or end time of Guide link programming bymore than 10 minutes, it will no longer be performed as Guide linkprogramming. The programming will be performed according to thetime setting.Timer already expired ! • The starting time in Timer Programming has already passed. Setthe timer correctly. (p. 63)Timer incorrect ! • Set the start and end times in Timer Programming correctly. (p. 63)