Using Network Services (DLNA / VIERA Connect / freesat)94Wired connection settingsThis setting is for the network connection by using the LAN cable.1 Select [Network Type] and set to [Wired]ab-cd-ef-gh-ij-klConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWired access / storeselectIf you make the network connection like “Example 2” (p. 92), you donot have to set [Acquire DNS Address], [Proxy] and [Proxy Port].2 Select [IP/DNS Settings] and set the itemsIP/DNS Settings AccessNetwork Setupaccessselect■ [Acquire IP Address] / [Acquire DNS Address]Sets [IP Address], [Subnet Mask], [Gateway], [Primary DNS] and [Secondary DNS].Select [Acquire IP Address] / [Acquire DNS Address] and set to [Auto] (recommended)Acquire IP Address AutoIP AddressSubnet MaskGatewayAcquire DNS AddressDNS AddressProxy SettingsIP/DNS SettingsAuto• The available settings are displayed automatically.Manual settings([IP Address], [Subnet Mask], [Gateway], [Primary DNS],[Secondary DNS])access / storeselect3 Select [Proxy Settings] and set the itemsAcquire IP AddressIP AddressSubnet MaskGatewayAcquire DNS AddressDNS AddressProxy SettingsIP/DNS SettingsAutoAutoAccessaccessselect• After settings, return to [Network Setup] screen■ [Proxy]Sets Proxy address.• This is the address of the relay server that is connected to the target server instead of the browserand sends data to the browser. Setting is required if specified by the provider.1. Select [Proxy] 2. Enter the address 3. Store0ProxyProxy PortProxy SettingsA B C D E F G H I J K L M N O P Q R S TU V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #a b c d e f g h i j k l m n o p q r s tu v w x y z ( ) + - . * _ProxyHostaccessselect selectset• To use numeric buttons“Characters table for numericbuttons” (p. 117)■ [Proxy Port]Sets Proxy port number.• This number is also specified by the provider with the Proxy address.1. Select [Proxy Port] 2. Move the cursor and enter the number0ProxyProxy PortProxy Settings select move