Timer Programming | Child Lock64Guide : Guide link programming - Programmes according to the TV Guide signal (p. 27)S/P : Split Programme programming (p. 27)• These functions are not available in Analogue mode or Other Sat. mode.Guide link programming is Timer Programming which is controlled by information from the TV Guide;if programme start and end times are changed by the broadcaster, the timer programming event willfollow the change.A Split Programme programming is a Guide link programming which is interrupted by one or moreother programmes.Note that Guide link programming (including Split Programme programming) only works reliably ifcorrect information is received from broadcasters.■ To change a timer programming event ■ To cancel a timer programming eventSelect the programme to be changed Select the programme to be deletedaccessselect Correct as necessary(as above) (red)■ To record with subtitles (if available) ■ To cancel a timer programming event temporarilySelect the programme to record with subtitles Select the programme to be cancelled(yellow) (blue)• Each time pressed : • Each time pressed :auto off cancel stop cancelling■ To view details of the programming (only for Guide link programming)Select the programme to be viewed• Press again to return to Timer Programming menu.Child LockYou can lock specific channels / AV input terminals and control who watches them.When the locked channel / input is selected, a message appears; by entering the PIN number, you canwatch it.■ To return to TV1 Display the menu2 Select [Setup]Main MenuPictureSoundTimerSetupaccessselect3 Select [Child Lock]AccessChild Lockaccessselect