Using Network Services (DLNA / VIERA Connect / freesat)954 Select [Connection Test] and access to testab-cd-ef-gh-ij-klConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWiredAccessaccessselect• Performs automatic testing of the network connection for the TV.(It takes a while to test.)Check network cable connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection for VIERA Connect.Connection Test : succeededThe test is successful and the TV is connected to the network.: failedCheck the settings and connections, and then perform thisfunction again.Wireless connection settingsThis setting is for the network connection by using the Wireless LAN Adaptor. (Wireless connection)• Confirm the encryption key, settings and positions of your access point before starting setup. Fordetails, read the manual of the access point.1 Select [Network Type] and set to [Wireless]ab-cd-ef-gh-ij-klConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWireless access / storeselect2 Select [Access Point Settings]ab-cd-ef-gh-ij-klConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWirelessAccess accessselect• When the access point is already set, [Current Settings] screenwill be displayed. To change the settings, select [No] on thisscreen and go to the next step.3 Select the connection type and setConnection TypePlease select network connection type.WPS(Push button)WPS(PIN)Search for access pointManualaccessselect• For details of each connection type (p. 96, 97)• After settings, return to [Network Setup] screen