Panasonic WJ-FS616C Operating Instructions Manual

Also see for WJ-FS616C: Operating instructions

-39-13241324 SEGMENT SCREEN4 57 SEGMENT SCREEN6 71472583699 SEGMENT SCREEN1 23 4 5 6710 SEGMENT SCREEN8 9 101 2 34 56 7 8 91013 SEGMENT SCREEN11 12 131 2 3 45 6 7 89 10 11 121316 SEGMENT SCREEN14 15 16ENTRANCEENTRANCEEL-ZOOMMULTISCREENSELECT3. Electronic Zooming1. Repeat the procedures described above for SingleSpot.2. Press the EL-ZOOM button to display the zoomedpicture.The LED on the EL-ZOOM button lights up.3. Press the UP, DOWN, LEFT or RIGHT button tomove the picture in the desired direction.Note: Operating these buttons beyond the picturerange activates control of the pan/tilt head.4. To cancel this mode, press the EL-ZOOM buttonagain.The selected camera picture is displayed in spotmode, and the LED on the EL-ZOOM button goesoff.4. Multi Spot1. Repeat steps 1 and 2 described for Single Spot onpage 38.2. Press the MULTISCREEN SELECT button repeat-edly.Each time the MULTISCREEN SELECT button ispressed, the next of the 6 available multiscreens isdisplayed as follows.Notes:• Blank channels are displayed in black.• Dividing patterns and segment numbers areshown above.• Any camera can be assigned to any segment ina pattern.5. Multi Still1. Repeat steps 1 and 2 described for Single Spot onpage 38.2. Press the MULTISCREEN SELECT button repeat-edly to display the desired multiscreen.The divided screens appear on the monitor screen.3. Press the STILL button. The LED on the buttonlights up.4. Press the CAMERA button corresponding to thepicture you want to be stilled.The LED on the pressed CAMERA button starts toblink.