Panasonic WJ-HD500A Operating Instructions Manual

Also see for WJHD500A - Digital Disk Recorder: Operating instructions Operating instructions

Contents

Panasonic WJ-HD500A Operating Instructions Manual Manual pdf 45 page image

46● Group Title SetupThis item lets you edit the group title to be displayed on themonitor screen.Each title is composed of 8 alphanumeric characters.1. Move the cursor to TITLE in the COMMON SETUP menuby pressing the D or C button, then press the SET but-ton.The GROUP SETUP (TITLE) menu as shown belowappears on the monitor screen.2. Move the cursor to the group editing area to be editedby pressing the D or C button.3. Select a character by pressing the + or - button.The characters shown below can be selected insequence.Numeral: 0 1 2 3 4 5 6 7 8 9Alphabet: A to Z, a to zSymbols: ¨ Æ = ? ' " # $ % & ( ) * + , – . / : ;Space: •4. Press the B button to move the cursor to the right, thenselect a character by pressing the + or - button.5. Repeat the above steps 3 and 4 until all characters arecompleted for the selected group title.If a wrong character is selected, move the cursor to thecharacter to be replaced by pressing the A or B but-ton, then select a new character by pressing the + or- button.6. Repeat the above steps 2 to 5 to edit other group titles.7. When satisfied with all the group titles, press theSETUP/ESC button to return to the previous COMMONSETUP menu.ON: Select this mode when the cameras are gen-locked to the system.OFF: Select this mode when asynchronous camerasare used in the system.The default setting is OFF.Note: Confirm camera synchronization in the system.The incorrect setting will cause improper recording.■ Group SetupAs described before, the Disk Recorder activates therecording function of the assigned cameras in four groupswhen the TIMER is set to INT (internal).These items let you determine the camera's group forrecording.● Camera Assignment1. Move the cursor to CAMERA ASSIGNMENT in theCOMMON SETUP menu by pressing the D or C but-tons, then press the SET button.The GROUP SETUP (CAMERA ASSIGNMENT) menu asshown below appears on the monitor screen.2. Move the cursor to the group editing area for the cam-eras by pressing the A, B, D or C buttons.3. Select a group number (1 to 4) to be assigned bypressing the + or - button.The factory default setting is 1.4. Repeat the above step 2 and 3 to assign the groupnumber for other cameras.5. When all camera assignments are completed, press theSETUP/ESC button to return to the previous COMMONSETUP menu.1-2 GROUP SETUP(TITLE)GROUP1 G1••••••GROUP2 G2••••••GROUP3 G3••••••GROUP4 G4••••••1-1 GROUP SETUP(CAMERA ASSIGNMENT)CAM GROUP CAM GROUP1 1 9 12 1 10 13 1 11 14 1 12 15 1 13 16 1 14 17 1 15 18 1 16 1