Panasonic WJ-HD500A Operating Instructions Manual

Also see for WJHD500A - Digital Disk Recorder: Operating instructions Operating instructions

Contents

Panasonic WJ-HD500A Operating Instructions Manual Manual pdf 9 page image

9$7 Alarm Port (ALARM)This port accepts the alarm input from the associatedalarm sensors through either Normally Open orNormally Closed contacts.The pin assignment of the port is shown below.$8 Copy Port (COPY)For connecting the optional DVD Extension Unit or aseparately purchased CD-R drive.$9 Mode Selector (MODE)Selects data termination for PS•Data system expansion.%0 Data Port (DATA)Exchanges control data with the external device withPS •Data (Panasonic Security Data) mode.%1 Remote Port [REMOTE (WV-CU50)]This port is provided for controlling the Disk Recorderwith the optional WV-CU50 Remote Controller.To connect to the controller, use a 6-conductor modularcable supplied as an accessory with the controller.%2 Gen-lock Output Connector (GEN-LOCK OUT)This connector is used to connect an external systemfor synchronization.To record images at maximum recording rate, for exam-ple 60 fps, connect this output to the cameras to syn-chronize the system.%3 Serial Port (SERIAL)For connecting a Personal Computer.%4 Signal Ground Terminal (SIGNAL GND)%5 10/100BASE-T Port (Optional)An optional Network Board can be installed in the DiskRecorder.This port is used to exchange control data with Ethernetvia an Ethernet Hub.%6 Cooling FanPrevents the temperature of the Recorder from rising,Do not block the ventilation opening on the cover.%7 AC Inlet Socket (AC IN)Plug the power cord (supplied as a standard accesso-ry) into this socket and connect it to an AC outlet.%8 Power Switch (POWER ON/OFF)This switch turns the power of the Disk Recorder on andoff.%9 Video Output Connectors (VIDEO OUT 1 - 16)The video signal connected to the Video InputConnector (VIDEO IN) is looped through these connec-tors with an automatic 75 Ω termination.^0 Video Input Connectors (VIDEO IN 1 - 16)These connectors accept either a color or B/W compos-ite video signal from the camera.PinNo.ALARM1131425Designation12345678910111213Alarm Input 1Alarm Input 2Alarm Input 3Alarm Input 4Sequence Timing InputAlarm Reset OutputGroundAlarm Recover InputAlarm OutputAlarm Input 10Alarm Input 11Alarm Input 12Alarm Input 13PinNo.141516171819202122232425DesignationGroundAlarm Input 5Alarm Input 6Alarm Input 7Alarm Input 8Alarm Input 9Ground+5 V Output (0.2 A)Recording Timer SelectInputAlarm Input 14Alarm Input 15Alarm Input 16