Panasonic WJ-HD500A Operating Instructions Manual

Also see for WJHD500A - Digital Disk Recorder: Operating instructions Operating instructions

Contents

Panasonic WJ-HD500A Operating Instructions Manual Manual pdf 73 page image

74■ Buzzer SettingThis item lets you enable or disable the buzzer soundaccompanying operation of the Disk Recorder's buttons.1. Move the cursor to the BUZZER parameter in the SYS-TEM SETUP menu by pressing the D or C button.2. Select either ON or OFF by pressing the + or - but-ton.ON: Enables the buzzer.OFF: Disables the buzzer.The factory default setting is ON.■ User Defined SettingThis item lets you select either save or load the userdefined setting previously made in the setup menu.1. Move the cursor to the USER DEFINED SETUP parame-ter in the SYSTEM SETUP menu by pressing the D orC button.2. Select either mode by pressing the + or - button.SAVE: Saves the settings currently made as the userdefined settings.LOAD: Restores the settings to the user defined set-tings previously saved.The factory default setting is LOAD.3. Press the SET button to display the selected modesetup menu as shown below.■ Password Lock SettingThe system setup and operations can be password protect-ed to prevent a malfunction of the system due to accidentalerasure of data, alteration of settings or erroneous opera-tions by unauthorized persons.There are two passwords, defining the operational restric-tions, as shown below.ALL: Both normal operations and setup operations areallowed.OPERATION: Only normal operations are allowed.● Auto Button Locked SettingThis item lets you enable or disable the button lock functionautomatically.1. Move the cursor to the AUTO KEY LOCK parameter inthe SYSTEM SETUP menu by pressing the C or D but-ton.2. Select either ON or OFF by pressing the + or - but-ton.OFF: No protection is applied until the LOCK button ispressed.ON: Enables the button lock function automatically if nooperation takes place within about 5 minutes.The factory default setting is OFF.● Password SettingThe items below let you determine the password for thebutton lock function.1. Move the cursor to PASSWORD ALL in the SYSTEMSETUP menu by pressing the C or D button, thenpress the SET button.The cursor moves to the right editing area.2. Select a 5-digit password in the editing area.Select the first digit by pressing the + or - button.3. Move the cursor to the right by pressing the B button,then select a digit by pressing the + or - button.4. Repeat the above steps 2 and 3 until the password iscompleted.5. When the password is completed, press the SETUP/ESC button to return the cursor to ALL.6. Similarly repeat the above steps 1 to 5 to set the pass-word for OPERATION.Note: It is recommended to take a note of both pass-words for password verification.9-1 USER DEFINED SETUPLOAD USER DEFINED SETUPYES NO[SET]:EXECUTE9-2 USER DEFINED SETUPSAVE USER DEFINED SETUPYES NO[SET]:EXECUTE