Panasonic WJ-HD500A Operating Instructions Manual

Also see for WJHD500A - Digital Disk Recorder: Operating instructions Operating instructions

Contents

Panasonic WJ-HD500A Operating Instructions Manual Manual pdf 49 page image

50■ Alarm Active Mode (ManualRecording)This item lets you select the active mode when an alarm isreceived during manual recording.1. Move the cursor to TRIGGER ACTION SETUP in theMANUAL REC SETUP menu by pressing the D or Cbutton, then press the SET button.The TRIGGER ACTION SETUP menu as shown belowappears on the monitor screen.2. Move the cursor to the active mode editing area for thecamera by pressing the A, B,C or D button.3. Select the desired active mode by pressing the + or- button.REC+ALM: Enables alarm recording and alarm activa-tion.REC: Enables only alarm recording.The ALARM display on the monitor is disabled.OFF: Deactivates alarm input.The ALARM display on the monitor is also disabled.The factory default setting is REC+ALM.4. Repeat the above steps 2 and 3 to select the activemode for other cameras.5. When all camera modes are completed, press theSETUP/ESC button to return to the previous MANUALREC SETUP menu.6. To return to the WJ-HD500 SETUP, press the SETUP/ESC button.Timer Recording SetupThe Disk Recorder can record the images triggered by theinternal timer.The internal timer comprises four event times common tothe recording groups, and is programmed in the setup.1. Move the cursor to TIMER in the WJ-HD500 SETUPmenu by pressing the D or C button.2. Select either audio recording display by pressing the+ or - button, then press the SET button.The TIMER REC SETUP menu according to the speci-fied audio function will appear on the monitor screen.■ Program TimerThese items let you set the program timer for each day ofthe week.1. Move the cursor to the program editing area for eachday in the TIMER REC SETUP menu by pressing the Dor C button.2. Select a program timer (PROG1 to PROG4) to beassigned for the day.It is recommended to assign a program to a weekday, aweekend or on a daily basis.Selecting (---) will disable the program timer.3. Repeat the above step to assign the program timer forother days.4. Move the cursor to the assigned program number(PROG1), then press the SET button.The assigned program number menu as shown belowappears on the monitor screen.2-1 TRIGGER ACTION SETUPCAM ACTION CAM ACTION1 REC+ALM 9 REC+ALM2 REC 10 REC+ALM3 OFF 11 REC+ALM4 REC+ALM 12 REC+ALM5 REC+ALM 13 REC+ALM6 REC+ALM 14 REC+ALM7 REC+ALM 15 REC+ALM8 REC+ALM 16 REC+ALM3 TIMER REC SETUP(WITHOUT AUDIO)PROGRAMSUNDAY ---MONDAY ---TUESDAY ---WEDNESDAY ---THURSDAY ---FRIDAY ---SATURDAY ---DAILY PROG1TIMER SPECIAL DAYEXT REC MODE ---3-1 PROG1(WITHOUT AUDIO)NO START END G1 G2 G3 G41 0:00 6:00 T/L T/L T/L T/LRATE 7.5 7.5 1 102 6:00 12:00 M/S - O/S O/SRATE 10 5 13 12:00 18:00 M/S M/S M/S M/SRATE 5 2 2 54 18:00 24:00 O/S M/S - M/SRATE 15 10 10SET TOTAL REC RATE ON EACH TABLEG1+G2+G3+G4= UNDER 60FPSREC-CAMERA SETUP (SET) ON NO1-4