105Configure the settings relating to network transmission [Transmission]Select the [Transmission] tab on the "Network" page. (+ Page 60)The settings relating to the resolution and rate to transmit live images to a PC via a network can also be configured on this tab.[Live video resolution]Select the resolution for live images from the following.REC resolution: Live images are transmitted with theresolution applied at the time of recording.QVGA: Live images are transmitted in the QVGA size.Default: REC resolution:[Live video rate(rec resolution)]Select the image transmission rate of live images (activatedwhen recording is not performed) when "REC resolution" isselected for "Live video resolution". During recording, record-ing rate is activated for live image transmission.Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only forHD716K)Default: 7.5ips[Live video quality(rec resolution)]Select the image quality of live images (activated whenrecording is not performed) when "REC resolution" is select-ed for "Live video resolution". During recording, recordingimage quality is activated for live image transmission.XF (Extra Fine): Extra qualitySF (Super Fine): Super high qualityFQ (Fine): High qualityNQ (Normal): Standard qualityEX (Extended): Low quality (for long recording)Default: FQ[Live video rate(QVGA)]Select the transmission bit rate when "QVGA" is selected for"Live video resolution".128Kbps/192Kbps/256Kbps/384Kbps*/512Kbps** Only for HD716KDefault: 256Kbps[Bandwidth control]Select the maximum transmission rate for data to be trans-mitted from the following.Unlimited/512Kbps/1 024Kbps/2Mbps/3Mbps/5Mbps/8MbpsDefault: UnlimitedNote:• Regardless of the setting for "Live video resolution",when images are displayed on a multiscreen (4-split/9-split/16-split screen) or with the sequential display,"QVGA" is activated for resolution, and the setting for"Live video rate (QVGA)" is activated when image istransmitted.• When image is displayed on a single screen, the settingfor "Live video resolution" is activated when image istransmitted.• The settings for "Live video rate(rec resolution)", "Livevideo quality(rec resolution)" and "Live video rate(QVGA)"are applied to each screen segment.Example: When "128Kbps" is selected for "Live videorate (QVGA)" while images are being displayed on a4-split screen, the whole transmission rate is512 Kbps.• Select the setting for "Bandwidth control" so that thevalue is greater than the total rate required for networktransmission. When the setting value is less than thetotal transmission rate, image data may be destroyedduring transmission.Example: When "QVGA" is selected for "Live video res-olution" and "128Kbps" is selected for "Live videorate (QVGA)" while 4 PCs displaying a single screenare accessing the recorder simultaneously, select thevalue greater than "512Kbps" for "Bandwidth con-trol".When "REC resolution" is selected for "Live video resolu-tion", it is recommended to set "Unlimited" for"Bandwidth control" to prevent the images from destruc-tion due to change in transmission rate caused by therecording setting. When images are destroyed evenwhen "Unlimited" is selected for "Bandwidth control",select a lower value for image quality or recording rate.
