91[4-screen live sequence]Configure the settings for the sequential display when dis-playing images with the sequential display on a 4-splitscreen.When the [Setup] button is selected, the following setuppage will be displayed to configure each setting item.• [Cam.]Select a camera image to be displayed at each stepfrom the following.--: Skips the selected step.Quad1 - 4: Displays images from camera channels 1 - 4on a 4-split screen.Quad5 - 8: Displays images from camera channels 5 - 8on a 4-split screen.Quad9 - 12: Displays images from camera channels 9 -12 on a 4-split screen.Quad13 - 16: Displays images from camera channels13 - 16 on a 4-split screen.• [Dwell time]Select an interval time to go to the next sequential step.2s/3s/5s/10s/20s• [Back] buttonCloses the setup page for 4-screen live sequence andreturns to the [Network] tab.Note:• Depending on the network traffic, the sequential displaymay not work exactly with the set interval time for [Dwelltime].Configure the settings relating to the cascade connection [Cascade]Select the [Cascade] tab on the "Display" page. (+ Page 60)The settings relating to the cascade connection to use two or more recorders can be configured on this tab.[Cascade]Select "On" or "Off" to determine whether to enable or dis-able the cascade connection to use two or more recorders.Select "On" when using two or more recorders for the cas-cade connection.Note:When "On" is selected for "Cascade", the time of therecorders whose "Unit address (system)" (+ page 93) isset to "002" to "004" are periodically adjusted to that ofthe recorder whose "Unit address (system)" is set to"001". (Cascade time adjustment)However, when "On" is set for "Time adjustment"(+ page 95), the time will be adjusted according to theNTP server.[Cascade sequence]Select "On" or "Off" to determine whether or not to performthe sequential display when the recorders are connected inthe cascade connection.It is possible to perform the sequential display in the order ofcascade connection of the recorders.
