86Configure the display settings for Monitor 1 [Monitor 1]Select the [Monitor 1] tab on the "Display" page. (+ Page 60)Select "On" or "Off" to determine whether or not to display the time, camera title and alarm display on Monitor 1.The settings relating to the sequence display on Monitor 1 can also be configured on this tab.[Time & date display]Select "On" or "Off" to determine whether to enable or dis-able the time display.[Camera title display]Select "On" or "Off" to determine whether to enable or dis-able the camera title display.[Alarm display]Select "On" or "Off" to determine whether to enable or dis-able the alarm display.[Login screen]Select a camera image to be displayed during the login pro-cedure.--: No camera image will be displayed. (Black screen)Cam. 1 to Cam. 16: Displays an image from the select-ed camera channel on a single screen.4Screen-A/4Screen-B/4Screen-C/4Screen-D/4Screen(WD)/7Screen(WD)/8Screen/9Screen-A/9Screen-B/9Screen(WD)/12Screen(WD)-A/12Screen(WD)-B/16Screen/SEQRefer to page 84 for further information about each multiscreen display pattern, and refer to page 87 for furtherinformation about the sequential display.Default: --[Secret view]The secret view is a function that skips camera images dis-played with a single screen display on Monitor 2 when dis-playing with the sequential display on Monitor 1. Select "On"or "Off" to determine whether to enable or disable the secretview function.On: Enables the secret view function. (Camera imagesdisplayed with a single screen display on Monitor 2is displayed as a black screen. ) However, whenrecorded images are displayed on Monitor 2, theblack screen is not displayed.Off: Disables the secret view function.[Live sequence]Configure the sequential display settings of camera images.Select the [Setup] button to configure the settings.(+ Page 87)[Sequence timing]Determine how to switch camera images.Int: Switches images according to the settings of the"Dwell time" of "Live Sequence".Ext: Switches images by signals from an externaldevice.Mon2: Switches images according to the sequence tim-ing of Monitor 2.Note:• "Ext" is selected when an external device is connectedto output the sequence signals• Pin No. 21 (Sequence Switching) of the ALARM/CONTROL connector on the rear panel of the recorderworks as an input terminal when "Int" is set for"Sequence timing", and works as an output terminalwhen "Ext" is set. (+ Page 44)
