Panasonic WJ-HDB502 User Manual

Panasonic WJ-HDB502 User Manual Manual pdf 14 page image

14WJ-HD500 SETUPWhen the WJ-HDB502 Network Board is installed in the WJ-HD500 Disk Recorder, it is enabled setup the WJ-HD500SETUP menu from the PC in the networkOn the MAIN CONTROL PANEL window, clicking the[HDB500 MENU] button will display the user ID and pass-word dialog box.Enter your user ID and password in the dialog box.The WJ-HD500 SETUP MENU window shown in the figurewill appear on the display.Note: When the access is made from the PC that is previ-ously registered host with the host authorization, theWJ-HD500 SETUP MENU window will automaticallyappear on the display.If the registration is not completed yet, enter the defaultuser name and password as shown below.User Name: adminPassword: nil (not required) Programming Setup WindowAs shown in the figure, the WJ-HD500 SETUP MENU win-dow has eight main submenus. Seven of these are furtherdivided into additional submenus.The display underlined indicates that the item has a sub-menu for more detailed setups. Timer SettingThe timer recording mode is triggered by the internal or anexternal timer.This item lets you enable or disable the timer for recording.Select a parameter to be activated by clicking the pulldownlist.INT: Selects the internal timer for recording as sched-uled in the programmed menu.EXT: Selects the external timer for recording whendetecting power on and off.OFF: Timer recording is disabled.To record manually, set to this mode.The factory default setting is OFF.Note: When the parameter is set to something otherthan OFF, the Disk Recorder does not start record-ing even if the REC button is pressed.