20 Special Day TimerClick the TIMER SPECIAL DAY display in the underneath ofthe TIMER REC SETUP window will display the TIMER SPE-CIAL DAY SETUP window as shown in the figure.This window allows for up to 30 days to be defined as spe-cial days.In this table, 30 specific user defined days are assigned toone day of the week.Before programming this table, confirm that the ProgramTimer is programmed completely.1. Enter a month and then date in the box by pressing thekeyboard.Note: The programmed month and date will be valid forevery year.2. Select the day of the week to be activated the pro-grammed timer by clicking the pulldown list.3. Repeat the above steps to program the other specialdays.4. If the another table to program the special days, clickthe NEXT 10 display. The new programming table willappear on the display screen.5. When satisfied with all special days, click the [SET]button to execute the selections. Time Lapse Recording(Internal Timer)These items let you set the recording parameters for TimeLapse Recording assigned in the program number window.(Continued from Program Timer)Select the recording mode T/L in the program number win-dow by clicking the pulldown list, then click the [More] but-ton.The selected Time Lapse Recording window as shown inthe figure will appear on the display screen. Timer Recording ModeThese items let you set the recording mode in Time LapseRecording with the internal programmed timer.1. Select the recording time mode to be set by clicking thepulldown list.SF-✽✽H: Selects the recording time mode in enhancedfine quality.FQ-✽✽H: Selects the recording time mode in fine quali-ty.NQ-✽✽H: Selects the recording time mode in normalquality.EX-✽✽H: Selects the recording time mode in extendedquality.SP: Freely selectableOFF: Enables only the alarm recording.✽✽ indicates the hours for recording time mode:2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480, 720,960, 1200, 1440, 2160, 2880, 3600, 4320, 6480, 8640When the parameter SF/FQ/NQ/EX is selected forrecording mode, the recording rate and quality areautomatically set according to the selected recordingtime mode.Note: It may no be possible to set the recording time,depending on the remaining storage capacity of theHard Disk.The factory default setting is SF-24H

Introduction

PREPARATIONS

Network Setup of the WJ-HD500

Main Page and Control Window

WJ-HDB502 BOARD SETUP

Video Mode Setup

Alarm Notice Setup

Host Setup

WJ-HD500 SETUP

Common Recording Setup

Group Setup (Camera Assignment)

Manual Recording Setup

Timer Recording Setup

Program Timer

Special Day Timer

MULTIPLEXER SETUP

Sequence Setup

Sequence Setup (Spot Monitor)

Quad Pattern Setup

ALARM SETUP

Alarm Port Setting

DISPLAY SETUP

Camera Title Setup

COMMUNICATION SETUP

Input (Camera) Number Setup

SYSTEM SETUP

Disk Management

SYSTEM OPERATIONS

ACCESS AUTHORIZATION

Access Level

CONTROLS AND OPERATIONS

Monitoring Live Images

Search Record Function

Alarm Reset Function

Panasonic WJ-HDB502 User Manual

WJ-HDB502