5 Network Setup of the WJ-HD500After the WJ-HDB502 Network Board is installed in the WJ-HD500 Digital Disk Recorder, confirm that the communica-tion parameters are set correctly in the WJ-HD500 SETUPmenu of the Disk Recorder.Open the COMMUNICATION SETUP menu in the WJ-HD500 SETUP menu, then set the IP Address, Netmaskand Gateway specified.Refer to the Operating Instructions included in the WJ-HD500 for further details.Note: When the Disk Recorder with the Network board isconnected alone to a PC as Basic Connection, thesesettings are not required and use the factory defaultsetting. PC SetupThe following procedures are only required setup when theWJ-HD500 with the Network Board is connected alone to aPC as Basic Connection.The factory default settings of the WJ-HDB502 are as fol-lows:IP address: 192.168.0.10Netmask: 255.255.255.0Gateway: 192.168.0.1For a client PC to access WJ-HDB502 factory default set-tings, set the IP address of the PC to 192.168.0.✽✽ (✽✽means any number from 2 to 254 except 10).q Power up the client PC.w Change the PC’s TCP/IP to match the factory defaultsettings of the WJ-HD500.If your PC's OS is Windows95 or Windows98, proceedas follows:(1) Click the [Start] button, point to settings, and thenclick Control Panel.8 COMMUNICATION SETUPPS•Data SETUPRS232C SETUPNETWORK SETUPIP ADDRESS 192.168.000.010NETMASK 255.255.255.000GATEWAY 192.168.000.001(2) Double-click Network.(3) In the Network dialog box, click the Configurationtab.(4) Choose TCP/IP, and then click the [Properties]button to display the TCP/IP Properties dialog box.(5) Specify an IP Address and Subnet Mask as follows:IP Address: 192.168.0.9Subnet Mask: 255.255.255.0e Restart the PC to execute the setting.r Start the WWW browser, and select [Do not use proxyfor address 192.168.0.10].If your browser is Netscape Communicator, proceed asfollows:(1) Click the Edit menu, and then click Preferences.

Introduction

PREPARATIONS

Network Setup of the WJ-HD500

Main Page and Control Window

WJ-HDB502 BOARD SETUP

Video Mode Setup

Alarm Notice Setup

Host Setup

WJ-HD500 SETUP

Common Recording Setup

Group Setup (Camera Assignment)

Manual Recording Setup

Timer Recording Setup

Program Timer

Special Day Timer

MULTIPLEXER SETUP

Sequence Setup

Sequence Setup (Spot Monitor)

Quad Pattern Setup

ALARM SETUP

Alarm Port Setting

DISPLAY SETUP

Camera Title Setup

COMMUNICATION SETUP

Input (Camera) Number Setup

SYSTEM SETUP

Disk Management

SYSTEM OPERATIONS

ACCESS AUTHORIZATION

Access Level

CONTROLS AND OPERATIONS

Monitoring Live Images

Search Record Function

Alarm Reset Function

Panasonic WJ-HDB502 User Manual

WJ-HDB502