23Operations flowz Obtain the license (Registration Key)☞ Activation Key Cardx Connection☞ Page 24c Turn on the recorder☞ Page 34v Register the license (Registration Key)☞ Page 36b Configure the minimum settings[Easy Start]☞ Page 41n Setup☞ Operating Instructions (PDF)Start operationsz Obtain the "Registration Key" of the recorder by follow-ing the instructions on the provided Activation Key Card.To increase number of the connected camera, get theadditional camera registration key number described onthe Activation Key Card packaged in the AdditionalCamera Kit (WJ-NVE30, WJ-NVE30W: optional).x Connect the recorder to each device.c Turn on the power of the recorder.v Register the Registration Key of the recorder. If neces-sary, register the "Registration Key" for the AdditionalCamera Kit or for the Additional Business IntelligenceKit.Important:Be sure to register the "Registration Key" of the•recorder. If the "Registration key" of the recorder is notregistered, the one for the extension software cannot beregistered. A message to prompt the registration will bedisplayed.b Register the date & time and cameras on "Easy Start".When it is not necessary to change other default set-tings, it is possible to start operations.n If necessary, perform the detailed settings for each func-tion.Note:Some functions are not supported depending on the•models of the connected cameras. For further informa-tion about detailed specifications, refer to the operatinginstructions of the cameras in use.