Panasonic WJ-NV300K Installation Manual

Also see for WJ-NV300K: Operating instructions Quick reference guide Operating instructions

Panasonic WJ-NV300K Installation Manual Manual pdf 43 page image

43Undetectable: Cannot obtain images from the camera.Authentication error: Failed in the authentication to dis-play images from the camera.Important:If "Undetectable" is displayed, check the camera con-•nections, and retry the camera registration.If "Authentication error" is displayed, initialized the cam-•era and retry the camera registration by referring to theoperating instruction of the camera.If the registered camera is not correctly detected or if•you wish to change the camera settings, change theregistered information on the "Basic setup" menu - the"Camera" page - the "Camera registration" tab. (☞Operating Instructions (PDF))[Refresh] buttonObtain the latest camera image after interchanging cameras.[Exit] buttonExits the setup menu and returns to the top screen of thesetup menu.[Next] buttonProceeds to the settings for recording.Step 8Perform the settings for recording. If the settings are per-formed on "Easy Start", the settings will be applied to all thecameras.[Frame rate]Select the recording frame rate.1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 30 ipsDefault: 10 ipsNote:To apply 60 ips, configure on "Advanced recording•setup" on the "Recording setup" tab under "REC &event" of "Basic setup".[Image quality]Selects the image quality of recorded images.NQ (Normal): Standard qualityFQ (Fine): High qualitySF (Super Fine): Super fine qualityXF (Extra Fine): Extra fine qualityDefault: FQNote:If "XF" is selected when the compression method of the•camera is "MJPEG", "SF" will be set instead of "XF".[Referenced recording days]Calculates and displays the total number of days for whichrecording on the hard disk drives is available.Note:The referenced recording days will be calculated based•on the assumption that recording is started on Monday.The HDD consumption for the event recording will be•excluded.If a camera manufactured by other than Panasonic is•used, the value of "Referenced recording days" will notbe displayed.When configured to perform recording in high resolution•and high quality, recording may sometimes not be per-formed at the specified rate.When there may be possibility to fail recording at thespecified rate while using only Panasonic cameras, theconfirmation window will be displayed.Step 9Click the [Exit] button.Saves the settings and returns to the top screen of the→→setup menu.