Panasonic WJ-SX650 Series Operating Instructions Manual

Also see for WJSX650 - SWITCHER: Product catalog Operating instructions

Contents

Panasonic WJ-SX650 Series Operating Instructions Manual Manual pdf 43 page image

43Reference No.111213141 to 8: Camera unit numberNote: Camera unit number cannot be set for camera input channels accepting video input signals fromrecorders. To activate RS-485 camera connections, set "OFF" for Control of these recorders in "System"– "Recorder".ON: OverlapOFF: Not overlapS: Less than 500 m {1 600 ft}M: 500 m {1 600 ft} to 900 m {2 900 ft}L: 900 m {2 900 ft} to 1 200 m {4 000 ft}Note: Refer to p. 27 for details on the cable length. Tooltip Details12345678910Explanation1 to 8: Port No.4800 bps, 9600 bps, 19200 bps, 38400 bps: Transmission speedCharacter entry limit: 20 characters Available characters: Alphanumeric characters and symbols1,2: Level1 to 8: Video input board No.Available parameters: Blank, 1 to 999ON: UseOFF: Not useNote: ON is not available for recorders when camera input channels are set for RS-485 cameras. To acti-vate recorder connections, set "--" for the setting items of "RS485" and "Unit number" in "System" –"VD2/DATA/Cable Comp." – "RS485 Camera".Available parameters: Blank, 1 to 999Note: Select the camera numbers that has been set in "System" – "Logical Camera Number".[DATA1] TMNL1, PSD: Port type[DATA1] TMNL2: Port type[DATA3] TMNL3, HDR1: Port type[DATA4] TMNL4, HDR 2: Port type[DATA5] TMNL 5: Port type[DATA6] TMNL 6: Port type[DATA7] TMNL7, HDR3: Port type[DATA8] TMNL8, HDR4: Port type4800 bps, 9600 bps, 19200 bps: Transmission speedTo change the transmission speed, conform the settings of this unit to that of connected devices.[Input Board 1] 1 to 4: Port number[Input Board 2] 5 to 8: Port number[Input Board 3] 9 to 12: Port number[Input Board 4] 13 to 16: Port number[Input Board 5] 17 to 20: Port number[Input Board 6] 21 to 24: Port number[Input Board 7] 25 to 28: Port number[Input Board 8] 29 to 32: Port numberNote: Port numbers cannot be set for camera input channels accepting video input signals from recorders. Toactivate RS-485 camera connections, set "OFF" for Control of these recorders in "System" – "Recorder".Notes:• Do not edit the setup data files by using text editors,etc. You may become unable to open the setup datafiles.• To perform q, w, and u, this unit needs to be con-nected to the PC with an RS-232C cable.When you point the cursor on a button or pull-down menu,a tooltip appears. Tool tips that have additional explana-tions include reference numbers such as "∗1". Refer to thefollowing diagram for these additional explanations.