61The following is the procedure examples for recorder con-trol. Refer to p. 74 Lists of Operations and Functions forother recorder control procedures not described here. Thefollowing procedures are available when a camera isselected.Note: Depending on statuses, recorder control may not beperformed properly. In this case, check the recorderstatus, and retry the control. PlaybackIn the following example, you will play back the recordedimage of Camera 3.1. Check that Camera 3 has been selected.WV-CU950/650 WV-CU360C/360CJ2. Press the PLAY/PAUSE* 1 (or PLAY* 2) button. Therecorder connected to Camera 3 will be activated, andrecorded image of Camera 3 will be played back.*1 WV-CU950/650* 2 WV-CU360C/CJWV-CU950/650 WV-CU360C/360CJ Manual Recording WV-CU950/650Press the REC button.The recorder will be activated, and recording will be start-ed. WV-CU360C/CJ1. Select a recorder. (Refer to p. 62 Recorder Selection.)2. Press the ZOOM WIDE and TELE buttons.The recorder will be selected, and recording will bestarted. NoteRecording follows the manual recording setting of recorder. Multiscreen Display WV-CU950/650Press the MULTI SCREEN button.The recorder will be selected, and images will be displayedin multiscreen segments on the selected monitor. WV-CU360C/CJPress the MULTI SCREEN SEL button while holding downthe SHIFT button.The recorder will be selected, and images will be displayedin multiscreen segments on the selected monitor. NoteYou cannot specify multiscreen segment patterns. Search PlaybackPress the SEARCH*1 (or INDEX* 2) button.The recorder will be selected, and a search list (time-and-date entry form, recording event search list*3, VMD searchlist*3, marking search list*3, or list search window*4) will bedisplayed on the selected monitor.* 1 WV-CU950/650* 2 WV-CU360C/CJ*3 Not available for WJ-RT416 Series*4 Available only for WJ-RT416 SeriesNotes:• Depending on selected recorder disks, the search listdisplay may differ.• In a search list, you can select a recorded image toplay back. Refer to the operating instructions ofrecorder for operating procedures.Recorder Control