Panasonic WJ-SX650 Series Operating Instructions Manual

Also see for WJSX650 - SWITCHER: Product catalog Operating instructions

Contents

Panasonic WJ-SX650 Series Operating Instructions Manual Manual pdf 49 page image

49This chapter explains about SETUP MENU (On-screenDisplay setup menu) of this unit. Basic OperationsTo control SETUP MENU, display SETUP MENU on a moni-tor. WV-CU950/6501. Select a desired monitor. (Refer to p. 58 MonitorSelection.)2. Press the MENU button repeatedly until "System Setup"appears on the LCD.3. Press the F1 button. SETUP MENU will be displayed onthe selected monitor. WV-CU360C/CJ1. Select a desired monitor. (Refer to p. 58 MonitorSelection.)2. Press the SETUP button while holding down the SHIFTbutton.SETUP MENU will be displayed on the selected monitor. Top MenuWhen SETUP MENU is opened, the top menu is displayedon the monitor.Moves the cursor: Move the joystick. The cursor is highlight-ed when you point.Moves to the next/previous page (When the displayed menuhas two or more pages): Move the cursor to the top orbottom. The next or previous page will be displayed onthe monitor.Note: When using WV-CU950/650, you can perform thisoperation by rotating the shuttle ring or moving thezoom wheel controller.Changes the selected parameter: Rotate the JogDial, orpress the + or – button.Enters the numeric parameters: Press the numeric buttons.To clear the numeric entry, press the CLEAR button.Moves to the lower menu: Move the cursor to a setting itemwhich has an arrow mark, and then press the CAM(SET) button.Moves to the upper menu: Press the MON (ESC) button.Exits the SETUP MENU: When using WV-CU950/650, pressthe F2 button. When using WV-CU360C/CJ, press theSETUP button while holding down the SHIFT button.Notes:• Sequence is stopped on monitors displaying SETUPMENU.• Alarms are not activated on monitors displaying SETUPMENU.Setup Menu (OSD)WJ-SX650 SETUP MENU100 TIME&DATEO300 ALARMO400 RECORDERO500 SYSTEMO800 INFORMATIONO900 LANGUAGE ENGLISH