Panasonic WV-CW324LE Series Operating Instructions Manual

Also see for WV-CF304LE: Installation guide

Panasonic WV-CW324LE Series Operating Instructions Manual Manual pdf 12 page image

12Screen when “SCENE1” is selected Screen when “SCENE2” is selected**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(LOW)SENS UP OFFWHITE BAL ATW1DNR HIGHAUTO2VMD OFFRET TOP ENDD&N(IR)**CAMERA SETUP**SCENE2COPY(SCENE1)ALC/ELC ALCSHUTTER OFFAGC ON(LOW)SENS UP OFFWHITE BAL ATW1DNR HIGHAUTO2VMD OFFRET TOP ENDD&N(IR)Camera operation setting [CAMERA SETUP]The following describes the camera operation settings. The following settings can be configured on the “CAMERA SETUP” screendisplayed from the top screen.Refer to page 5 for how to call up the screen.The settings configured on the “CAMERA SETUP” screen will be saved as a scene file.1. Register a scene file [SCENE1/SCENE2]It is possible to register 2 patterns of scene file. When different settings are to be applied between day and night, SCENE1 can beapplied in the daytime and SCENE2 at night. Change between the scene files can be made by shortcut operation. ( page 28)“SCENE1” is set as the default setting.Step 1After confirming that “SCENE1” is selected, configure the settings of “ALC/ELC” through “VMD”. ( page 12-20)To change the scene files, go to step 2.Step 2Move the cursor to “SCENE1” and press the [RIGHT] or [LEFT] button to select “SCENE2”.→ The screen changes and displays “SCENE2”.Step 3To configure the settings of “SCENE2” using the settings of “SCENE1”, press the [SET] button after moving the cursor to“COPY(SCENE1)”.→ The settings of “SCENE1” will be copied to “SCENE2”.Step 4Edit the settings to be changed as the settings of “SCENE2”.The number displayed at the right side of the title on each setting screen indicates a scenefile number.Step 5Move the cursor to “SCENE2” and press the [RIGHT] or [LEFT] button to select “SCENE1”to resume normal operation.2. Light quantity control method selection [ALC/ELC]The method of controlling the quantity of light is selected from the following in accordance with the lens to be used.ALC (default): The iris of the lens is automatically adjusted in accordance with the brightness of a subject. Select “ALC” when usingan ALC lens.ALC+: Controls the quantity of light with a combination of the electronic shutter and auto iris. This selection is suitable at shootinga bright subject such as an outdoor subject with auto iris lens. Be aware that flicker may occur when a subject is underfluorescent lighting.ELC: Controls the quantity of light with the electronic shutter. This selection is suitable for use of a lens with fixed iris or manual iris.Scene filenumber**ALC CONT**(1)- +.I..... 0“ALC CONT” screenBACK LIGHT COMPBLC OFFABS OFFLEVELRET TOP ENDMASK SET