Panasonic WV-CW324LE Series Operating Instructions Manual

Also see for WV-CF304LE: Installation guide

Panasonic WV-CW324LE Series Operating Instructions Manual Manual pdf 16 page image

16Manual fine adjustment of white balanceThe white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature trackingmode (ATW1, ATW2) or automatic white balance control mode (AWC).Follow the procedures below.**ATW1**(1)R - +B - +AREARET TOP END**ATW1 AREA**(1)POSITION PUSH SETRET TOP ENDArea setting screenRESET...I... 0...I... 0“CAMERA SETUP” screen Fine adjustment screen**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(LOW)SENS UP OFFWHITE BAL ATW1DNR HIGHAUTO2VMD OFFRET TOP ENDD&N(IR)Step 1Set “WHITE BAL” to “ATW1”, “ATW2” or “AWC” and press the [SET] button.→ The fine adjustment screen appears.Step 2Move the cursor to “R” and “B” and press the [LEFT] or [RIGHT] button to fine adjust the level for each. “R” stands for red and “B”stands for blue.When the level indicator moves in the “+” direction, the color becomes deeper, and when the level indicator moves in the “–” direction,the color becomes lighter.Step 3Move the cursor to “AREA” and press the [SET] button to enter “AREA” setting screen.The area to detect white area of white balance can be set on the area setting screen. The area to detect white area of white balanceis displayed full-screen by default.Step 4Move the cursor to “POSITION” and press the [SET] button.Step 5Press the [UP], [DOWN], [RIGHT] and [LEFT] buttons to move to the upper-left part of the area to be set, and press the [SET] button.Step 6Press the [UP], [DOWN], [RIGHT] and [LEFT] buttons to move to the lower-right part of the area to be set, and press the [SET] button.7. Digital noise reduction function setting [DNR]The digital noise reduction function reduces noise automatically under the condition of low illuminance.The effect level of the noise reduction function is selectable from the following.LOW: Low level of noise reduction (small residual image)HIGH (default): High level of noise reduction (large residual image)8. Black-and-white mode setting [D&N (IR) ]The settings relating to the black-and-white mode can be configured.Follow the procedure below.