Panasonic WV-CW324LE Series Operating Instructions Manual

Also see for WV-CF304LE: Installation guide

Panasonic WV-CW324LE Series Operating Instructions Manual Manual pdf 21 page image

21Camera system setting [SYSTEM SETUP]Performs the settings relating to the camera system such as synchronization, alarm input/output terminal and privacy zone. Thefollowing settings can be configured on the “SYSTEM SETUP” screen displayed from the top screen.Refer to page 5 for how to call up the screen.10. Synchronization method [SYNC]Only internal synchronization (INT) can be used.Multiplexed vertical drive (VD2) synchronization cannot be used.11. Privacy zone setting [PRIVACY ZONE]When undesired portions in the camera shooting area (on the screen) exist, those portions (privacy zone) can be set to be hidden. Upto 8 portions can be specified for the privacy zone.ON (1): Grays the zone.ON (2): Mosaics the zone.OFF (default): Displays the zone normally.Follow the procedure below to set the privacy zone.Note:• The privacy zone function is disabled at initializing the unit, i.e. right after turning on the power.** ZONE NUMBER 1 /8**PUSH SETPOSITIONUPPER LEFTRET TOP ENDDEL - +ZONE LEVEL ..I.... 2“SYSTEM SETUP” screen “ZONE NUMBER” screenON(2)**SYSTEM SETUP**SYNC INTPRIVACY ZONESTABILIZER OFFEL-ZOOM OFFUPSIDE-DOWN OFF- +LDC I...... 0RET TOP ENDStep 1Move the cursor to “PRIVACY ZONE”, select “ON (1)” or “ON (2)”, and press the [SET] button.→ The “ZONE NUMBER” screen appears.Step 2Move the cursor to the number at the right of the title and select the zone number using the [RIGHT] or [LEFT] button.Step 3Move the cursor to “POSITION” and press the [SET] button.Step 4Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the left upper position of the zone to be set and press the [SET]button.“SYSTEM SETUP” screen**SYSTEM SETUP**SYNC INTPRIVACY ZONE OFFSTABILIZER OFFEL-ZOOM OFFUPSIDE-DOWN OFF- +LDC I...... 0RET TOP END