Contents - operating instructions
- about the user manuals
- trademarks and registered trademarks
- viewer software
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Monitor images on a PC
- About the "Live
- Monitor images from multiple cameras
- Monitor images on a cellular phone/mobile terminal
- Monitor images on a mobile terminal
- Action at an alarm occurrence
- Transmit images onto an FTP server
- about the log list window
- playback of images on the sd memory card
- About the playback
- Download the images (When "H.264" is selected for "Recording format" of the SD memory card)
- About the network security
- Display the setup menu from a PC
- How to operate the setup menu
- About the setup menu window
- Configure the basic settings of the camera [Basic]
- sd memory card
- frame rate
- image quality
- How the logs and images are saved depending on the settings for "Alarm
- How the logs and images are saved depending on the settings for "Manual Schedule
- How the logs and images are saved depending on the settings for "FTP error
- Configure the settings relating to the picture (camera) mode [JPEG/H.264] (NP502 NW502S)
- Configure the settings relating to JPEG images [JPEG/H.264] (or [JPEG MPEG-4])
- image quality setting
- Configure the settings relating to image adjust, zoom, extra optical zoom, extra zoom focus, back focus, privacy zone and VIQS [Image quality]
- Configure the settings relating to image quality ("Image adjust" setup menu) (SW355 SW352, SW316L, SW316, SW314, SW155, SW152, SW115)
- auto slow shutter
- white balance
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF346 SF342, SF336, SF335, SF332, SP306, SP305, SP302)
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF135 SF132, SP105, SP102)
- Configure the settings relating to image quality ("Image adjust" setup menu) (NP502 NW502S)
- dwell time
- Set mask areas
- Configure the focus setting (Focus setup menu) (SW355, SW352, SF346, SF336 SP306)
- Adjust the zoom and focus (SW316L, SW316)
- auto focus
- Back focus setting (Back focus setup menu) (NP502, NW502S)
- Adjust the angular field of view using the extra optical zoom function (SW355, SW352 SF335, SW314, SP305)
- Adjust the angular field of view using the extra zoom function (SW155, SW152, SF135 SP105, SW115)
- Configure the settings relating to the privacy zone (Privacy zone setup menu)
- Configure the VIQS setting
- Configure the VIQS area
- Configure the settings relating to audio [Audio] (SW355, SW352, SF346, SF342, SF336 SF335, SF332, SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Configure the multi-screen settings [Multi-screen]
- camera title
- Configure the settings relating to the alarm action [Alarm]
- command alarm
- Configure the settings relating to the alarm image [Alarm]
- Change the AUX name [Alarm] (SW355, SW352, SF346, SF342, SF336, SF335, SF332 SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Set the VMD areas [VMD area]
- Configuration of the settings relating to the E-mail notification [Notification]
- Configure the settings relating to Panasonic alarm protocol [Notification]
- Configure the settings relating to the XML notification [XML notification]
- Configuration of the settings relating to the face detection [Face detection]
- face detection
- Configure the settings relating to the authentication [User mng.]
- Configure the settings relating to the host authentication [Host auth.]
- Configure the settings relating to the priority stream [System]
- stream type
- Configure the settings of the servers [Server]
- Configure the settings relating to the FTP server [FTP]
- user name
- Configure the settings relating to the NTP server [NTP]
- time zone
- Configuring the network settings [Network]
- network settings
- subnet mask
- Configure the HTTPS settings (SW355, SW352, SW316L, SW316, SW314, SW155 SW152, SF135, SF132, SW115)
- Generation of the CRT key (SSL encryption key)
- Generation of the self-signed certificate (security certificate)
- Generation of CSR (Certificate Signing Request)
- Installation of the server certificate
- Configuration of the connection protocol
- Install the security certificate
- Configure the settings relating to DDNS [DDNS]
- Configuration of the DDNS service (Example of the "Viewnetcam.com" service)
- When using the "Viewnetcam.com" service
- Procedure to register information for the "Viewnetcam.com" service
- Checking the information registered for the "Viewnetcam.com" service
- Configure the settings relating to SNMP [SNMP]
- Configure the settings relating to the FTP periodic image transmission [FTP img trans.]
- trans.]
- How to delete the set schedule
- Configure the settings relating to the schedules [Schedule]
- Maintenance of the camera [Maintenance]
- Upgrade the firmware [Upgrade]
- Check the status [Status]
- Reset the settings/Reboot the camera [Default reset]
- About the displayed system log
- error indications relating to ntp
- Troubleshooting
|
Note• The red area of the slider and angular field of view adjustment outline represents optical zoom (x1.0- x3.2), and the yellow area represents extra optical zoom (x3.5 - x6.4). In the extra optical zoom areathe zoom ratio changes in x0.32 increments.[Manual zoom adjustment]The zoom can be adjusted manually.• : Click this button to adjust the zoom ratio to the “Wide” side until x1.0.• : Click this button to set the zoom ratio to x1.0.• : Click this button to adjust the zoom ratio to the “Tele” side until x6.4.Note• The zoom ratio is from x1.0 - x3.2 for the optical zoom, and from x3.5 - x6.4 for the extra optical zoom.In the extra optical zoom area the zoom ratio changes in x0.32 increments.• When operating , , buttons, the auto focus function is not activated. Adjustthe focus after adjusting the angle of view.IMPORTANT• The extra optical zoom function may not be activated on the appropriate position if the setting for thefunction is performed after the settings for the mask areas (®page 117), privacy zone (®page 126),VMD area (®page 141). To prevent this, perform the setting for the extra optical zoom function beforeother settings.[Manual focus adjustment]The focus can be adjusted manually.• [Near] button: Click this button to adjust the focus to the “Near” side.• [Reset] button: Click this button to reset the focus to the default.• [Far] button: Click this button to adjust the focus to the “Far” side.[Auto focus]The auto focus function starts to automatically adjust focus based on a subject located in the center of thescreen by clicking the [Execute] button.IMPORTANT• When “Auto slow shutter” (®page 97) is enabled, if “Auto focus” is executed during slow shutteroperations at night, it may take a long time to complete “Auto focus”.[Adjusting method]Select the focus adjustment method upon switching between the color mode and the black & white mode.• Auto: Adjusts the focus function automatically and corrects out of focus when switching between color andblack & white images.• Preset: Performs the preset movement to each specified focus position when switching between color andblack & white images. The preset position is the focus position specified last time, which was automaticallymemorized for each of color images and black & white images.• Fix: Fixes the position after adjusting the focus either automatically or manually.• Default: Auto[Close] buttonClick this button to close the “Zoom/Focus adjustment” setup menu.122 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
PreviousNext |