Contents - operating instructions
- about the user manuals
- trademarks and registered trademarks
- viewer software
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Monitor images on a PC
- About the "Live
- Monitor images from multiple cameras
- Monitor images on a cellular phone/mobile terminal
- Monitor images on a mobile terminal
- Action at an alarm occurrence
- Transmit images onto an FTP server
- about the log list window
- playback of images on the sd memory card
- About the playback
- Download the images (When "H.264" is selected for "Recording format" of the SD memory card)
- About the network security
- Display the setup menu from a PC
- How to operate the setup menu
- About the setup menu window
- Configure the basic settings of the camera [Basic]
- sd memory card
- frame rate
- image quality
- How the logs and images are saved depending on the settings for "Alarm
- How the logs and images are saved depending on the settings for "Manual Schedule
- How the logs and images are saved depending on the settings for "FTP error
- Configure the settings relating to the picture (camera) mode [JPEG/H.264] (NP502 NW502S)
- Configure the settings relating to JPEG images [JPEG/H.264] (or [JPEG MPEG-4])
- image quality setting
- Configure the settings relating to image adjust, zoom, extra optical zoom, extra zoom focus, back focus, privacy zone and VIQS [Image quality]
- Configure the settings relating to image quality ("Image adjust" setup menu) (SW355 SW352, SW316L, SW316, SW314, SW155, SW152, SW115)
- auto slow shutter
- white balance
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF346 SF342, SF336, SF335, SF332, SP306, SP305, SP302)
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF135 SF132, SP105, SP102)
- Configure the settings relating to image quality ("Image adjust" setup menu) (NP502 NW502S)
- dwell time
- Set mask areas
- Configure the focus setting (Focus setup menu) (SW355, SW352, SF346, SF336 SP306)
- Adjust the zoom and focus (SW316L, SW316)
- auto focus
- Back focus setting (Back focus setup menu) (NP502, NW502S)
- Adjust the angular field of view using the extra optical zoom function (SW355, SW352 SF335, SW314, SP305)
- Adjust the angular field of view using the extra zoom function (SW155, SW152, SF135 SP105, SW115)
- Configure the settings relating to the privacy zone (Privacy zone setup menu)
- Configure the VIQS setting
- Configure the VIQS area
- Configure the settings relating to audio [Audio] (SW355, SW352, SF346, SF342, SF336 SF335, SF332, SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Configure the multi-screen settings [Multi-screen]
- camera title
- Configure the settings relating to the alarm action [Alarm]
- command alarm
- Configure the settings relating to the alarm image [Alarm]
- Change the AUX name [Alarm] (SW355, SW352, SF346, SF342, SF336, SF335, SF332 SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Set the VMD areas [VMD area]
- Configuration of the settings relating to the E-mail notification [Notification]
- Configure the settings relating to Panasonic alarm protocol [Notification]
- Configure the settings relating to the XML notification [XML notification]
- Configuration of the settings relating to the face detection [Face detection]
- face detection
- Configure the settings relating to the authentication [User mng.]
- Configure the settings relating to the host authentication [Host auth.]
- Configure the settings relating to the priority stream [System]
- stream type
- Configure the settings of the servers [Server]
- Configure the settings relating to the FTP server [FTP]
- user name
- Configure the settings relating to the NTP server [NTP]
- time zone
- Configuring the network settings [Network]
- network settings
- subnet mask
- Configure the HTTPS settings (SW355, SW352, SW316L, SW316, SW314, SW155 SW152, SF135, SF132, SW115)
- Generation of the CRT key (SSL encryption key)
- Generation of the self-signed certificate (security certificate)
- Generation of CSR (Certificate Signing Request)
- Installation of the server certificate
- Configuration of the connection protocol
- Install the security certificate
- Configure the settings relating to DDNS [DDNS]
- Configuration of the DDNS service (Example of the "Viewnetcam.com" service)
- When using the "Viewnetcam.com" service
- Procedure to register information for the "Viewnetcam.com" service
- Checking the information registered for the "Viewnetcam.com" service
- Configure the settings relating to SNMP [SNMP]
- Configure the settings relating to the FTP periodic image transmission [FTP img trans.]
- trans.]
- How to delete the set schedule
- Configure the settings relating to the schedules [Schedule]
- Maintenance of the camera [Maintenance]
- Upgrade the firmware [Upgrade]
- Check the status [Status]
- Reset the settings/Reboot the camera [Default reset]
- About the displayed system log
- error indications relating to ntp
- Troubleshooting
|
8 About the network security8.1 Equipped security functionsThe following security functions are featured in this camera.Access restrictions by the host authentication and the user authenticationIt is possible to restrict users from accessing the camera by setting the host authentication and/or the userauthentication to “On”. (®page 153, page 154)Access restrictions by changing the HTTP portIt is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port number.(®page 166)Access encryption by the HTTPS functionSW355SW355SW352SW352SW316LSW316LSW316SW316SW314SW314SW155SW155SW152SW152SF135SF135SF132SF132SW115SW115It is possible to enhance the network security by encrypting the access to cameras using the HTTPSfunction. (®page 171)IMPORTANT• Design and enhance security countermeasures to prevent leakage of information such as image data,authentication information (user name and password), alarm E-mail information, FTP serverinformation, DDNS server information, etc. Perform the countermeasure such as access restriction(using the user authentication) or access encryption (using the HTTPS function).• After the camera is accessed by the administrator, make sure to close the browser for added security.• Change the administrator password periodically for added security.Note• When user authentication (authentication error) has failed to pass 8 times within 30 seconds using thesame IP address (PC), access to the camera will be denied for a while.Operating Instructions 418 About the network security
PreviousNext |