Contents - operating instructions
- about the user manuals
- trademarks and registered trademarks
- viewer software
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Monitor images on a PC
- About the "Live
- Monitor images from multiple cameras
- Monitor images on a cellular phone/mobile terminal
- Monitor images on a mobile terminal
- Action at an alarm occurrence
- Transmit images onto an FTP server
- about the log list window
- playback of images on the sd memory card
- About the playback
- Download the images (When "H.264" is selected for "Recording format" of the SD memory card)
- About the network security
- Display the setup menu from a PC
- How to operate the setup menu
- About the setup menu window
- Configure the basic settings of the camera [Basic]
- sd memory card
- frame rate
- image quality
- How the logs and images are saved depending on the settings for "Alarm
- How the logs and images are saved depending on the settings for "Manual Schedule
- How the logs and images are saved depending on the settings for "FTP error
- Configure the settings relating to the picture (camera) mode [JPEG/H.264] (NP502 NW502S)
- Configure the settings relating to JPEG images [JPEG/H.264] (or [JPEG MPEG-4])
- image quality setting
- Configure the settings relating to image adjust, zoom, extra optical zoom, extra zoom focus, back focus, privacy zone and VIQS [Image quality]
- Configure the settings relating to image quality ("Image adjust" setup menu) (SW355 SW352, SW316L, SW316, SW314, SW155, SW152, SW115)
- auto slow shutter
- white balance
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF346 SF342, SF336, SF335, SF332, SP306, SP305, SP302)
- Configure the settings relating to image quality ("Image adjust" setup menu) (SF135 SF132, SP105, SP102)
- Configure the settings relating to image quality ("Image adjust" setup menu) (NP502 NW502S)
- dwell time
- Set mask areas
- Configure the focus setting (Focus setup menu) (SW355, SW352, SF346, SF336 SP306)
- Adjust the zoom and focus (SW316L, SW316)
- auto focus
- Back focus setting (Back focus setup menu) (NP502, NW502S)
- Adjust the angular field of view using the extra optical zoom function (SW355, SW352 SF335, SW314, SP305)
- Adjust the angular field of view using the extra zoom function (SW155, SW152, SF135 SP105, SW115)
- Configure the settings relating to the privacy zone (Privacy zone setup menu)
- Configure the VIQS setting
- Configure the VIQS area
- Configure the settings relating to audio [Audio] (SW355, SW352, SF346, SF342, SF336 SF335, SF332, SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Configure the multi-screen settings [Multi-screen]
- camera title
- Configure the settings relating to the alarm action [Alarm]
- command alarm
- Configure the settings relating to the alarm image [Alarm]
- Change the AUX name [Alarm] (SW355, SW352, SF346, SF342, SF336, SF335, SF332 SW316L, SW316, SP306, SP305, SP302, NP502, NW502S)
- Set the VMD areas [VMD area]
- Configuration of the settings relating to the E-mail notification [Notification]
- Configure the settings relating to Panasonic alarm protocol [Notification]
- Configure the settings relating to the XML notification [XML notification]
- Configuration of the settings relating to the face detection [Face detection]
- face detection
- Configure the settings relating to the authentication [User mng.]
- Configure the settings relating to the host authentication [Host auth.]
- Configure the settings relating to the priority stream [System]
- stream type
- Configure the settings of the servers [Server]
- Configure the settings relating to the FTP server [FTP]
- user name
- Configure the settings relating to the NTP server [NTP]
- time zone
- Configuring the network settings [Network]
- network settings
- subnet mask
- Configure the HTTPS settings (SW355, SW352, SW316L, SW316, SW314, SW155 SW152, SF135, SF132, SW115)
- Generation of the CRT key (SSL encryption key)
- Generation of the self-signed certificate (security certificate)
- Generation of CSR (Certificate Signing Request)
- Installation of the server certificate
- Configuration of the connection protocol
- Install the security certificate
- Configure the settings relating to DDNS [DDNS]
- Configuration of the DDNS service (Example of the "Viewnetcam.com" service)
- When using the "Viewnetcam.com" service
- Procedure to register information for the "Viewnetcam.com" service
- Checking the information registered for the "Viewnetcam.com" service
- Configure the settings relating to SNMP [SNMP]
- Configure the settings relating to the FTP periodic image transmission [FTP img trans.]
- trans.]
- How to delete the set schedule
- Configure the settings relating to the schedules [Schedule]
- Maintenance of the camera [Maintenance]
- Upgrade the firmware [Upgrade]
- Check the status [Status]
- Reset the settings/Reboot the camera [Default reset]
- About the displayed system log
- error indications relating to ntp
- Troubleshooting
|
[Image capture size]Select the image capture size to display the JPEG image on the “Live” page for the first time.Aspect ratioSW355SW355SW352SW352SF346SF346SF342SF342SF335SF335SW316LSW316LSW316SW316SW314SW314SP306SP306SP305SP305SP302SP302SW155SW155SW152SW152SF135SF135SF132SF132SP105SP105SP102SP102SW115SW115Aspect ratio 4:3 QVGA/VGA/800x600*1/1280x960*2Aspect ratio 16:9 320x180/640x360/1280x720*2Picture (Camera) modeNP502NP5021.3 mega pixel (VGA) [4:3] QVGA/VGA/1280x9601.3 mega pixel (800x600) [4:3] QVGA/800x600/1280x9601.3 mega pixel [16:9] 320x180/640x360/1280x7203 mega pixel [4:3] VGA/1280x960/2048x15363 mega pixel [16:9] 320x180/640x360/1920x1080• Default:– 1280x960SW355SW355SF346SF346SF335SF335SW316LSW316LSW316SW316SW314SW314SP306SP306SP305SP305SP105SP105 /VGASW352SW352SF342SF342SP302SP302SP102SP102[Image quality]Select the image quality of JPEG images displayed initially on the “Live” page.• Default: Quality1[Image quality setting]Select two types of image quality of JPEG images for each image capture size.0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low• Default:– Quality1: 5 Normal– Quality2: 8The setting for “Quality1” is activated for FTP periodic image transmission, files attached to alarm E-mails andSD memory recording.*1SW352SW352SF342SF342SP302SP302SW152SW152*2SW355SW355SF346SF346SF335SF335SW316LSW316LSW316SW316SW314SW314SP306SP306SP305SP305SW155SW155SF135SF135SP105SP105SW115SW11578 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
|
