Panasonic WV-SF330 Series Operating Instructions Manual

Also see for WV-NP502: Product catalog Integration note Product catalog Comparison chart Operating instructions

Contents

Panasonic WV-SF330 Series Operating Instructions Manual Manual pdf 172 page image

Generation of the CRT key (SSL encryption key) (®page 172)Generation of the self-signed certificate (®page 173)Generation of CSR (Certificate Signing Request) (®page 175)Installation of the server certificate (®page 177)Configuration of the connection protocol (®page 178)Note• To use the server certificate, you need to apply for the approval and the issue of server certificate byCA.• Either of the self-signed certificate or the server certificate is available. If both of them are installed, theserver certificate will be used prior to the self-signed certificate.17.2.1 Generation of the CRT key (SSL encryption key)IMPORTANT• When the self-signed certificate or server certificate is valid, it is impossible to generate the CRT key.• When the server certification is used, the available key size varies depending on the Caches theavailable key size in advance.• To generate the CRT key, it may take about 1 minute when the key size is 1024 bit and about 2 minuteswhen the key size is 2048 bit. Do not operate the web browser until the generation of CRT key iscomplete. While the CRT key is being generated, the refresh interval and line speed may be lower.1. Click the [Execute] button of “CRT key generate”.→ The “CRT key generate” dialog box will be displayed.2. Select “1024bit” or “2048bit” for the length of the CRT to generate for “CRT key generate” - “RSA keysize”.Note• To use the server certificate, follow the requests from the CA about the RSA key size.3. Click the [Execute] button.→ The generation of CRT key will be started. When the generation is finished, the key size and generationtime & date of the generated key will be displayed on “Current CRT key”.Note• To change (or update) the generated CRT key, perform step 1 to 3. The CRT key, self-signed certificateand server certification are valid in a set. When the CRT key is changed, it is necessary to re-generatethe self-signed certificate or re-apply for the server certificate.172 Operating Instructions17 Configuring the network settings [Network]