11.5 Adjust the zoom and focusClick the [Setup>>] button of “Zoom/Focus adjustment” on the [Image quality] tab of the “Image/Audio” page.(®page 96)It is possible to adjust the angular field of view and the focus of the lens using the zoom/focus function.Zoom/Focus adjustmentIt is possible to adjust the angular field of view using the zoom and the extra optical zoom.Adjust the focus setting by moving the lens focus to the appropriate position.Manual and auto adjustments are available.[Zoom ratio designation]The zoom and focus can be adjusted at the same time.Operate the slider to enlarge/reduce the angular field of view adjustment outline in the image. When adjustingthe zoom ratio to the “Tele” side, only the angular field of view adjustment outline is reduced, and it is possibleto determine the zoom ratio while checking the angular field of view after zooming is performed. When adjustingthe zoom ratio to the “Wide” side, the image itself is zoomed out of or the angular field of view adjustmentoutline is enlarged, and it is possible to determine the zoom ratio while checking the image size after zoomingis performed. After the angular field of view adjustment outline is adjusted, zooming is performed, and the autofocus function starts to automatically adjust focus based on a subject located in the center of the screen byclicking the [Execute] button.Note• The red area of the slider and angular field of view adjustment outline represents optical zoom, andthe yellow area represents extra optical zoom. The supported optical and extra optical zoom ratios varydepending on the model and the selected image capture mode.Operating Instructions 10911 Configure the settings relating to images and audio [Image/Audio]
