5 Transmit images onto an FTP serverImages can be transmitted to an FTP server. By configuring the following settings, transmission of imagescaptured at an alarm occurrence or captured at a designated interval to an FTP server will become available.IMPORTANT• When using this function, set the user name and the password to access the FTP server to restrictusers who can log into the FTP server.5.1 Transmit an alarm image at an alarm occurrence(Alarm image transmission)An alarm image can be transmitted at an alarm occurrence to the FTP server. To transmit alarm images to anFTP server, it is necessary to configure the settings in advance.FTP server settings and settings relating to alarm image transmission can be configured in the “FTP” sectionof the [Advanced] tab of the “Network” page. (®page 161) Settings can also be configured from the “Alarmimage FTP transmission” settings of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page.(®page 128)Note• Depending on the network traffic, the number of the transmitted images may not reach the set numberof images to be transmitted.• Alarm images failed to be transmitted to the FTP server at an alarm occurrence will not be saved onthe SD memory card. However, images that fail to be transmitted with the FTP periodic imagetransmission will be saved.When “On” is selected for both the alarm image transmission function and the FTP periodic imagetransmission function, the alarm image transmission function will be given priority over the FTP periodicimage transmission function. Also, when “On” is selected for the “FTP transmission retry” FTP setting(®page 162), alarm images will be retransmitted if there is an FTP transmission failure. Therefore, ifthere is continuous retransmission due to network problems or other factors, periodic transmission willnot be performed and images that fail to be transmitted with the FTP periodic image transmission willnot be saved to an SD memory card.5.2 Transmit images at a designated interval orperiod (FTP periodic image transmission)Images can be transmitted at a designated interval or period. To transmit images at a designated interval orperiod, it is necessary to configure the settings in advance.FTP server settings and settings relating to FTP periodic transmission image transmission can be configuredin the “FTP” section of the [Advanced] tab of the “Network” page. (®page 161)Configure the schedule settings of the FTP periodic image transmission on the “Schedule” page.Note• Depending on the line speed or the traffic, images may not be transmitted at the designated interval.• When “On” is selected for both the alarm image transmission function and the FTP periodic imagetransmission function, the alarm image transmission function will be given priority over the FTP periodicimage transmission function. Therefore, images may not be transmitted at the interval designated onthe “FTP periodic image transmission” setting.28 Operating Instructions5 Transmit images onto an FTP server
