[Start] ® [Control Panel] ® [Network and Internet] ® [Network and Sharing Center] ® expand thesection of [Network discovery] of [Sharing and Discovery] ® select [Turn on network discovery] ® click[Apply] ® CompleteFor Windows 7[Start] ® [Control Panel] ® [Network and Internet] ® [Network and Sharing Center] ® select [Turn onnetwork discovery] of [Network discovery] of [Change advanced sharing settings] ® click [Savechanges] ® CompleteFor Windows 8.1 and Windows 8Right-click [Start] ® select [Control Panel] ® [Network and Internet] ® [Network and Sharing Center]® select [Turn on network discovery] of [Network discovery] of [Change advanced sharing settings]® click [Save changes] ® Complete16.2.5 Configure the HTTPS settingsIt is possible to enhance the network security by encrypting the access to cameras using the HTTPS function.Refer to page 171 for how to configure the HTTPS settings.[CRT key generate]CRT key (SSL encryption key) used for the HTTPS protocol is generated. To generate the CRT key, click the[Execute] button to display “CRT key generate” dialog box.[Self-signed Certificate - Generate]The camera itself generates the security certificate used for the HTTPS protocol. (Self-signed certificate)To generate the self-signed certificate, click the [Execute] button to display the “Self-signed Certificate -Generate” dialog box.[Self-signed Certificate - Information]Displays the information of the self-signed certificate.When the [Confirm] button is clicked, the registered information of the self-signed certificate will be displayedin the “Self-signed Certificate - Confirm” dialog box.When the [Delete] button is clicked, the generated self-signed certificate will be deleted.Operating Instructions 16716 Configuring the network settings [Network]
