232CH12BLUETOOTHSET UP A STEREO HEADSETWindows Mobile-based devices support A2DP (Advanced AudioDistribution Profile), which is used by Bluetooth-enabled stereoheadsets. Make sure that your stereo headset also supports A2DP.1 Make sure that your device and the stereoheadset are turned on, discoverable, and withinclose range.2 On the Home screen, press [Start], selectSettings, press OK.3 Scroll to Connections and press OK.4 Select Bluetooth and press OK.5 Select ‘Add new device…’, and press OK.6 Your device searches for other Bluetooth-enabled devices and displays them in the list.7 Select stereo headset, and press Add.8 In Passkey, enter the alphanumeric passkey forthe Bluetooth-enabled stereo headset. You canfind this in the manufacturer’s documentation foryour hands-free device. Press Next.9 Check the Hands Free service, and pressFinish.If the headset becomes disconnected, turn the headset on andrepeat steps 1-4 above. Select the stereo headset and press[Menu] then select Set as Wireless Stereo.
