270CH13VOICE COMMANDTROUBLESHOOTINGThe following troubleshooting tips will help you work around commonproblems:General TroubleshooterPhone and Contacts TroubleshooterReading Appointments TroubleshooterPlaying Music TroubleshooterStarting Programs TroubleshooterGENERAL TROUBLESHOOTERThis section contains answers to some of the most common questionsyou will have when using Voice command with your Pantech duo™.The Voice Command Button doesn’t work when the passwordscreen is displayed – The password screen blocks the VoiceCommand Button to avoid other people from placing phone calls whileyour device is locked. To enable, uncheck the ‘Password Protected’option. Note some organizations prevent this override from working dueto increased corporate security measures.I only hear a thunk sound but don’t see the microphone – Thismeans that you are holding the Voice Command Button too long. Thiscan be activated with the press and hold to disable the feature, which ishelpful in meetings when it isn’t convenient to speak cancel aloud.The Voice Command melody doesn’t play – Try the following:• Tap the speaker icon at the top of the screen. Verify that the volumeis loud enough and not muted.• Verify that the System Sound volume within the current profile is loudenough.____________________________
