271CH13VOICE COMMANDThe microphone icon doesn’t display – Try the following:• Make sure the button you’re pressing is assigned to Voice Command.• Make sure you are not holding the button long enough to engage thepress and hold to cancel feature.I can’t use the Voice Command Button reliably – On some devices,one of the available buttons is a rocker switch. On this type of button itis very easy to accidentally press the UP or DOWN rocker instead ofthe button. Try assigning Voice Command to another button.Voice Command says “Try again” or the microphone icondisappears – Try the following:• Pause longer before speaking.• Move your device further away.• Speak in a normal tone to avoid pausing between words.• Move to a less noisy environment.• Make sure you didn’t disable the command in Voice Commandsettings.• Use the Notes application to record your voice and playback at fullvolume. If the playback sound volume is very soft, this device may beoptimized for close talk use and you will need to move the devicecloser.Recognition doesn’t work – Some devices require a reset beforeVoice Command will operate.
