CH365CONTACTSIf you want to receive a contact by beam, you have to follow thesesteps.1 On the Home screen, press left soft key <[Start].2 Select Settings and press OK.3 Select Connections and press OK.4 Select Beam and press OK.5 Check Receive incoming beams.More information about Bluetooth, see Chapter 12. Bluetoothsection.CALL A CONTACT FROM CONTACT INFORMATIONYou can call a contact directly by selecting them from the Contactspage off the Home screen.1 On the Home screen, press the left soft key< [Start] and then jump to 3 or directlypress right soft key [Contacts].2 Select the contact to call and press OK.3 Scroll to the phone number to dial.4 Press OK or SEND.