Initial Startup and Configuration3-4 7976-A2-GB20-10August 1998Entering Identity InformationAfter accessing your unit for the first time, use the Change Identity screen todetermine SNMP administrative system information that will be displayed on theIdentity screen of the Status branch. To access the Identity screen, follow thismenu selection sequence:Main Menu →Control →Change IdentityÎÎÎÎÎÎmain/control/change_identity HotwireModel: 7976IDENTITYSystem Name: lllQJ98-001 ClearSystem Location: Bldg. A412, 2nd Floor, Left cabinet ClearSystem Contact: C. Parker 800-727-2396 pager 888-555-1212 Clear––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Ctrl-a to access these functions, ESC for previous menu MainMenu ExitSaveFields on the Identity screen are null until you enter values. The field valuesdisplay 40 characters with a maximum field length of 128 characters. If a fieldvalue is greater than 40 characters in length, use the left or right arrow keys toview the remaining text. Valid values are any printable ASCII character. ASCIIprintable characters include: Numeric 0–9 Upper or lower case A–Z Space All ASCII symbols except the caret (^)Select Clear to reset a field to a null value. ProcedureTo enter Change Identity screen information:1. Position the cursor in the System Name field. Enter a name unique in yournetwork to identify the SNMP managed node (or unit).The maximum length of System Name is 128 characters.2. Position the cursor in the System Location field. Enter the physical location ofthe unit.The maximum length of System Location is 128 characters.
