Configuration Option TablesA-8 7976-A2-GB20-10August 1998Communication PortFor Communication Port Options, refer to Table A-4. To access theCommunications Ports screen, follow this menu selection sequence:Main Menu →Configuration →Load Configuration From →CommunicationPortÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎmain/config/commport HotwireModel: 7976COMMUNICATION PORT OPTIONSPort Use: TerminalPort Type: AsynchronousData Rate (Kbps): 9.6Character Length: 8Parity: NoneStop Bits: 1Ignore Control Leads: EnableLogin Required: EnablePort Access Level: AdministratorInactivity Timeout: EnableDisconnect Time (Minutes): 5–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Ctrl-a to access these functions, ESC for previous menu MainMenu ExitTable A-4. Communication Port Options (1 of 3)Port UsePossible Settings: Terminal, Net LinkDefault Setting: TerminalSpecifies how the communications port is to be used.Terminal – The communication port will be used for the Asynchronous terminalinterface.Net Link – The communication port will be used as the network communication link toan IP network or device.Port TypePossible Settings: Asynchronous, SynchronousDefault Setting: AsynchronousWhen Port Use is set to Net Link, Port Type controls whether the communication portwill be asynchronous or synchronous.Asynchronous – Configures the communication port for asynchronous communication.Synchronous – Configures the communication port for synchronous communication.