1. About the Hotwire 8784 Termination Unit1-4 February 2001 8784-A2-GB20-30SNMP Management CapabilitiesThe Hotwire 8784 Termination Unit supports SNMP Version 1, and can bemanaged by any industry-standard SNMP manager and accessed using SNMPby external SNMP managers.Management Information Base (MIB) SupportFor a detailed description of supported MIBs, visit Paradyne’s Web site atwww.paradyne.com. The following MIBs are supported: MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with anetwork management protocol in TCP/IP internets and provides generalinformation about the unit. MIB II is backward-compatible with MIB I. DS1/E1 MIB (RFC 1406) – Reports the performance status of the DSX-1interface and supports the features found on the DSX-1 Performance Statisticsscreen. Paradyne Enterprise MIB – Supports configuration, status, statistics, andtests.Select Clear to reset a field to a null value.SNMP Trap SupportThe Hotwire 8784 Termination Unit supports traps as defined in RFC 1215.01-16114a-03DSX-18600 SeriesDSLAMNetwork7984ACINPUTAC48VDC CLASS 2 ORLIMITED PWR SOURCERTN48VAA B BT5A24 6A B...3.12POSITIONSTACKALM AINBDC FUSEST4A, MIN. 48V5DC PWRFANOUT SERIAL MCC 1 3123SYSTEMOKAlrmTest250VSYSTEMOKAlrmTest1234G.703 ALRMDSL PORTLINK-UP1234SYSTEMOKAlrmTest1234G.703 ALRMDSL PORTLINK-UPSDSL87151234RouterSNMP NMSEthernetInterfaceTDM SDSLEOC DataOperation, Maintenanceand Provisioning CenterEthernetLAN1234G.703 ALRMDSL PORTLINK-UP12348784
