A. Configuration OptionsA-2 February 2001 8784-A2-GB20-30Network Interface OptionsFor Network Interface Options, refer to Table A-1, Network Interface Options.To access the Network Interface Options screen, follow this menu selectionsequence:Main Menu→Configuration→Current Configuration→NetworkTable A-1. Network Interface Options (1 of 2)Margin ThresholdPossible Settings: –5db, –4db, –3db, –2db, –1db, 0db, 1db, 2db, 3db, 4db, 5db,6db, 7db, 8db, 9db, 10dbDefault Setting: 0dbDetermines the level, expressed in decibels, at which a signal-to-noise margin condition isrecognized.–5db to 10db – Sets the margin threshold to this value.Excessive Error Rate ThresholdPossible Settings: 1E–4, 1E–5, 1E–6, 1E–7, 1E–8, 1E–9Default Setting: 1E–6Determines the error rate at which an excessive error rate (EER) condition is recognized.The rate is the ratio of the number of CRC errors to the number of bits received in acertain period.1E–4 to 1E–9 – Sets the error rate threshold to this value.main/config/network HotwireSlot 4 Model: 8784Port 2NETWORK INTERFACE OPTIONSMargin Threshold: –3dbExcessive Error Rate Threshold: 1E–6AutoRate: DisableDSL Line Rate: 1552 KbpsPeer IP Address: 111.255.255.000 ClearCircuit Identifier: Clear--------------------------------------------------------------------------------Ctrl-a to access these functions, ESC for previous menu MainMenu ExitSave
