2. Using the Asynchronous Terminal Interface8784-A2-GB20-30 February 2001 2-9Ending an ATI SessionUse the Exit function key from any screen to terminate the session.ProcedureTo end a session with the asynchronous terminal interface:1. Press Ctrl-a to go to the function keys.2. Save changes if required. A confirmation message appears if you have madebut not saved changes to your configuration.3. Tab to Exit (or type e or E) and press Enter. If you have accessed the cardthrough the MCC, the Hotwire Chassis Card Selection menu appears.Exiting From the DSLAM SessionYou can manually log out of the system or, after five minutes of inactivity, thesystem automatically logs out when the inactivity time-out option is enabled.ProcedureTo manually exit from the Hotwire DSLAM system:1. Return to the Hotwire Chassis Main Menu by selecting Exit from either theHotwire – MCC menu or the Hotwire – DSL menu.The Hotwire Card Selection menu appears.2. Press Ctrl-z.The Hotwire Chassis Main Menu appears.3. From the Hotwire Chassis Main Menu, select Logout.The system exits from the current login session on the Hotwire DSLAM.
