2. Using the Asynchronous Terminal Interface2-2 February 2001 8784-A2-GB20-30Logging In to the Hotwire DSLAMYou can log in to the Hotwire DSLAM system using either a localVT100-compatible terminal or a remote Telnet connection.After you enter your user ID and password, the system displays the HotwireChassis Main Menu. See your Management Communications Controller (MCC)documentation for information about selecting the unit from the MCC cardselection screen.Initiating an ATI SessionThe Main Menu screen is displayed unless a login ID and password is required orthe ATI is already in use.If the ATI is already in use, the message connection refused is sent to theterminal attempting Telnet access.If security is enabled and Telnet is used to access the terminal unit directly (you didnot log in through the MCC), the system prompts you for a login ID and password.If you enter an invalid login ID and password three times, the Telnet session closesor the terminal connection returns to an idle state. Refer to Chapter 7,Security.Login HotwireSlot: 4 Model: 8784LOGINLogin ID:Enter Password:--------------------------------------------------------------------------------Ctrl-a to access these functions Exit
