Parker Compax3 Series Installation Manual
Also see for Compax3 Series: Operating instructionsOperating instructions
                                                            | |
Contents
| 
Notes on the Documents Supplied4 192-120102 N7 - February 20041.1 C3 ServoManagersThe Compax3 ServoManager can be installed directly from the Compax3 CD.Click on the appropriate hyperlink or start the installation program"C3Mgr_Setup_V.... .exe" and follow the instructions.Minimum requirementsFor successful installation, your PC must meet the following minimumrequirements:! Windows 98, Windows Me, Windows NT 4.0 (Intel) with Service Pack 6, Windows2000 or Windows XP.! Administrator authorization* on the system! Microsoft Internet Explorer 4.01 (SP2) or higher! Pentium-PC (300 MHz or faster is recommended)! 64 MB RAM (128 MB recommended)! Required HD capacity♦ CD-Installation: 350 MB before installation, 200 MB after installation! Super VGA-Monitor (with a resolution of at least 800 x 600, setting: small fonts)* you do not need administrator authorization for an update version!Your PC is connected with Compax3 over an RS232 cable (SSK1) (COM Ωinterface on the PC based on X10 Compax3).Start the Compax3 ServoManager and make the setting for the selected interfacein the menu Options: Port (RS232) COM 1 or COM 2.In the menu tree under device selection you can read the device type of theconnected device (Online Device Identification) or select a device type (DeviceSelection Wizard).Then you can double click on "Configuration" to start the configuration wizard. Thewizard will lead you through all input windows of the configuration.Installation of the C3ServoManagerConnection betweenPC and Compax3Device selectionConfiguration |
Related manuals for Parker Compax3 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine