Parker HMR 08 Series Assembly And Operating Instructions Manual

3ENContents1 Foreword to the Operating Instructions 42 Safety 43 Product Information 53.1 Scope of Application 53.2 Type Plate 54 Application, Proper Use 64.1 Prerequisite for Product Usage 64.2 Conversions and Modifications 64.3 Spare Parts and Accessories 65 Transportation and Storage 75.1 Transportation 75.2 Storage 76 Brief Description and Function 86.1 General 86.2 Setup and Mode of Action 86.3 Profile versions and Carrier 86.4 Profile versions 116.5 Guide System 116.6 Carriage 116.7 Noise Emission 117 Assembly 127.1 Important Information 127.2 Installation of Linear Drive 137.3 Attaching the Payload 167.4 Cover for IP54 177.5 Position Detection with Magnetic Switches 217.6 Impact Protection 257.7 Motor and Gearbox Mounting 268 Commissioning 308.1 First Commissioning 308.2 Operation 309 Maintenance and Repair 319.1 Customer Service 319.2 General Cleaning 319.3 Lubrication Intervals 319.4 Checking the Play of the Guide System 329.5 Checking the Bearing Play 329.6 Checking the Play in the Ball Screw Drive and Nut 329.7 Check and adjust belt tensioning 339.8 Checking the Cover Function 349.9 Replacing the Carriage 359.10 Replacing the Carriage 3910 Decommissioning 4410.1 Disassembly of a Machine or System 4410.2 Disposal 4411 Retrofit Kits 4511.1 IP54 Cover 4511.2 Position Detection internal and external 4612 Spare Part / Wearing Part Kits 4712.1 Outer Band Package 4712.2 Outer Band 4712.3 Drive Type Ball Screw 4812.4 Carriage Belt Drive 4912.5 Carriage Ball Screw Drive 5012.6 Carriage Belt Drive 5112.7 Drive Shafts Belt 5212.8 Belt Tensioning Block 5312.9 Impact protection 5413 Declaration of Incorporation 55Section Page