6Modular Electric HMR Linear Drives4 Application, Proper UseThe operational safety of the HMR is only ensured with proper use.Proper use of the HMR only includes the following:• Moving loads• Positioning masses• Exerting forceThe HMR is driven with rotating or linear motors.The catalog data and the conditions specified in the order confirmation must be taken into account. Please note thelimits from the technical data and the corresponding characteristic curves as per the catalog information.The values apply to continuous operation. With intermittent operation, the combination of speed and load mayaccommodate higher values for short periods. However, the individual maximum values indicated must not beexceeded.If the HMR is used in any other manner, this does not constitute proper use.Obvious misuseAny use to transport persons or applications of any manner in the private sector (consumers) is not authorized. Thismay result in personal injury and damage to property. We shall accept no liability for any injury or damage resultingherefrom. The user shall bear sole responsibility and risk.The following are not authorized:• Unauthorized modifications to the HMR• Processes that affect the safety of the HMRNote all of the information attached to the HMR.Keep this information in a fully legible condition.In addition, note the manufacturer’s information regarding lubricants, solvents and cleaning agents.4.1 Prerequisite for Product UsageThe installation must always be carried out such that:• The HMR is installed without delay• All connections and control components are accessible• The type plate with the product name remains legible• The ambient conditions are maintained corresponding to design delivered (IP20 or IP54)The operator must secure any hazardous sources that may result during installation in machines andsystems between Parker-Hannifin products and customer equipment, according to CE conformity.4.2 Conversions and ModificationsHMR linear drives may not be modified with respect to the design or safety-related features without the writtenapproval of Parker-Hannifin GmbH. Any unauthorized modification in this respect will exclude any liability on the partof Parker-Hannifin GmbH.If special attachments are to be used, the assembly regulations of the manufacturer must be observed.The following also apply:• Relevant accident prevention regulations• Generally recognized safety rules• EU directives• Country-specific provisions.4.3 Spare Parts and AccessoriesOriginal spare parts and accessories authorized by the manufacturer are intended to protect your safety. The use ofother parts could change the properties of the HMR.We shall accept no liability for any resulting consequences.