Parker HMR 08 Series Assembly And Operating Instructions Manual

44Modular Electric HMR Linear Drives10 Decommissioning10.1 Disassembly of a Machine or SystemDisassembly and the final shutdown of the HMR must be carried out by trained mechanical or electrical specialists.No stored energy (springs, fluid, pressure).CAUTIONCrushing hazard due to unexpected movementsThis could result in severe injuriesor damage to property.► Bring system to a standstill and secure.► Pay attention to the weight of any loads being lifted during vertical installation.► Screws and toothed belts are not self-locking, which means that the Drive Type, carriage and loadcould crash down.10.2 DisposalThe HMR does not contain any hazardous substances that require special attention during disposal. Lubricant residueis possible and should be expected.In addition to the main aluminum component, there are also installed steel parts and plastics such as PU and NBR.Non-ferrous metal is present in small quantities only.Electrical components (if used during operation) such as the motor and electronic switches must be disposed ofaccording to the local regulations in force.