Philips BDL4677XH User Manual

Also see for Signage Solutions BDL4677XH: Brochure & specs

BDL4677XH31.5. Mounting on a WallTo mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interfacethat complies with TUV-GS and/or UL1678 standard in North America.Protective SheetVESA GridTable Tabletop stand1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch thescreen face.2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc).3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipmentor injury to the user or installer. Product warranty does not cover damage caused by improper installation.4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten themsecurely.1.5.1. VESA GridBDL4677XH 400(H) x 200(V) mm200(H) x 200(V) mmCaution:To prevent the display from falling:• For wall or ceiling installation, we recommend installing the display with metal brackets which are commercially available. For detailed installationinstructions, refer to the guide received with the respective bracket.• To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure to consult thebracket manufacturer for installation location.Ventilation Requirements for enclosure locatingTo allow heat to disperse, leave space between surrounding objects as shown in thediagram below.100 mm 100 mm100 mm100 mm